- Name
- Scenes Controller
- Brand
- Zooz
- Features
- Feature Values Color
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0700
- Categories
- All Lighting Devices, On/Off Switches/Devices
- Product id
- 0xBB08
- S2 classes
- S2_UNAUTHENTICATED, S2_AUTHENTICATED
- Device type
- Binary Switch
- Oem version
- HW: 1 FW: 1.00
- Library type
- SLAVE_ENHANCED_232
- Product line
- Line A
- Supports nwi
- Yes
- Installer icon
- 0x0700
- Z wave version
- 7.13.6
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x027A
- Product type id
- 0xBB00
- Long description
- FEATURES: - Switch button: 15 A relay for Z-Wave on/off control - 4 remote control buttons: trigger scenes and control other devices in your Z-Wave network from this switch - NEW 700 series Z-Wave chip for better range and faster control - Direct 3-Way: works with regular on/off switches in a 3-way - Scene control: trigger actions with multi-tap (select hubs only) - Smart bulb mode: disable relay and control the light via Z-Wave - Adjustable LED indicator in 4 colors and 3 brightness levels - S2 Security and SmartStart for easier inclusion SPECS: - Model Number: ZEN32 - Z-Wave Signal Frequency: 908.42 MHz - Power: 120 VAC, 60 Hz - Maximum Load: 150W LED, 960W Incandescent, 1800W (15A) Resistive, 3A motor (DON’T use with receptacles) - Range: Up to 500 feet line of sight - Operating Temperature: 32-104° F (0-40° C) - Installation and Use: Indoor only
- Hardware platform
- ZGM130
- Short description
- Use this multitasking Z-Wave Switch to control other devices in your network with 4 remote control buttons.
- Product identifier
- ZEN32
- Countries / regions
- United States of America
- Supports smart start
- Yes
- Certification number
- ZC12-21030205
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 6
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_CONFIGURATION_V4
- Value white firmware updatable value updatable by consumer by rf neutral wire required switch load capacity watts value 150 z wave scene type value central scene electric load type value incandescent led association groups
- Group Number Maximum Nodes Supported End Point ID Group Name Description 1
- From to description 0 0 white 1 1 blue 2 2 green 3 3 red 7 led indicator color for button 1 choose the color of the led indicator for button 1. 2 1 0 3 0 from to description 0 0 white 1 1 blue 2 2 green 3 3 red 8 led indicator color for button 2 choose the color of the led indicator for button 2. 2 1 0 3 0 from to description 0 0 white 1 1 blue 2 2 green 3 3 red 9 led indicator color for button 3 choose the color of the led indicator for button 3. 2 1 0 3 0 from to description 0 0 white 1 1 blue 2 2 green 3 3 red 10 led indicator color for button 4 choose the color of the led indicator for button 4. 2 1 0 3 0 from to description 2 2 green 3 3 red 0 0 white 1 1 blue 17 auto turn on timer for relay use this parameter to enable or disable the auto turn on timer function (the time after which you want the switch to automatically turn on once it has been turned off). 2 4 0 65535 0 from to description 0 0 disabled 1 65535 minutes 1 led indicator mode for relay choose if you want the led indicator to turn on when the relay is on or off, or if you want it to remain on or off at all times. 2 1 0 3 0 from to description 0 0 led on when relay off, led off when relay on (default) 1 1 led on when relay on, led off when relay off 2 2 led always off 3 3 led always on 2 led indicator mode for button 1 choose if you want the led indicator to turn on when button 1 is on or off, or if you want it to remain on or off at all times. 2 1 0 3 0 from to description 0 0 led on when dimmer off, led off when dimmer on (default) 1 1 led on when dimmer on, led off when dimmer off 2 2 led always off 3 3 led always on 3 led indicator mode for button 2 choose if you want the led indicator to turn on when button 2 is on or off, or if you want it to remain on or off at all times. 2 1 0 3 0 from to description 0 0 led on when dimmer off, led off when dimmer on (default) 1 1 led on when dimmer on, led off when dimmer off 2 2 led always off 3 3 led always on 4 led indicator mode for button 3 choose if you want the led indicator to turn on when button 3 is on or off, or if you want it to remain on or off at all times. 2 1 0 3 0 from to description 0 0 led on when dimmer off, led off when dimmer on (default) 1 1 led on when dimmer on, led off when dimmer off 2 2 led always off 3 3 led always on 5 led indicator mode for button 4 choose if you want the led indicator to turn on when button 4 is on or off, or if you want it to remain on or off at all times. 2 1 0 3 0 from to description 0 0 led on when dimmer off, led off when dimmer on (default) 1 1 led on when dimmer on, led off when dimmer off 2 2 led always off 3 3 led always on 11 led indicator brightness for relay choose the led indicator's brightness level for the relay. 3 1 0 2 1 from to description 2 0 low (30%) 1 0 medium (60%) 0 0 white texts
