- Name
- ON/OFF SWITCH 700
- Brand
- Zooz
- Features
- Feature Values Neutral Wire Required
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0704
- Categories
- All Lighting Devices, On/Off Switches/Devices
- Product id
- 0xA001
- S2 classes
- S2_UNAUTHENTICATED, S2_AUTHENTICATED
- Device type
- Binary Switch
- Oem version
- HW: 1 FW: 1.00
- Library type
- SLAVE_ENHANCED_232
- Product line
- Line A
- Supports nwi
- Yes
- Installer icon
- 0x0700
- Z wave version
- 7.13.6
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x027A
- Product type id
- 0x7000
- Long description
- HIGHLIGHTS: - Manual or Z-Wave on/off control with instant status updates - NEW: 700 series Z-Wave chip for better range and faster control - Direct 3-Way: works with regular on/off switches in a 3-way - Scene control: trigger actions with multi-tap (select hubs only) - Smart bulb mode: disable relay and control the light via Z-Wave - Remembers and restores on/off status after power failure - Adjustable LED indicator in 4 colors and 3 brightness levels - Built-in Z-Wave range test tool and signal repeater - Works with LED and incandescent bulbs (don’t use with tube lights or receptacles) SPECS: - Model Number: ZEN71 - Z-Wave Signal Frequency: 908.42 MHz - Power: 120 VAC, 60 Hz - Maximum Load: 150W LED or CFL bulbs, 960W Incandescent, 1800W (15A) Resistive, 3A motor (DON’T use with receptacles) - Range: Up to 500 feet line of sight - Operating Temperature: 32-104° F (0-40° C) - Installation and Use: Indoor only
- Hardware platform
- ZGM130
- Short description
- 700 Series Z-Wave Plus On Off Wall Switch with Direct 3-Way Functionality (no add-on switch needed).
- Product identifier
- ZEN71
- Countries / regions
- United States of America
- Supports smart start
- Yes
- Certification number
- ZC12-21020181
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_CONFIGURATION_V4
- Value 960 z wave scene type value central scene color value white electric load type value incandescent led firmware updatable value updatable by consumer by rf association groups
- Group Number Maximum Nodes Supported End Point ID Group Name Description 1
- From to description 0 0 upper paddle turns the light on, lower paddle turns it off (default) 1 1 upper paddle turns the light off, lower paddle turns it on 2 2 any paddle turns light on/off 2 led indicator control choose if you want the led indicator to turn on when the switch (light) is on or off, or if you want it to remain on or off at all times. 2 1 0 3 0 from to description 1 1 led indicator is on when switch is on, led indicator is off when switch is off 2 2 led indicator is always off 3 3 led indicator is always on. 0 0 led indicator is on when switch is off, led indicator is off when switch is on (default) 5 auto turn on timer use this parameter to enable or disable the auto turn on timer function (the time after which you want the switch to automatically turn on once it has been turned off). 2 4 0 65535 0 from to description 0 0 timer disabled 1 65535 minutes 3 auto turn off timer use this parameter to enable or disable the auto turn off timer function (the time after which you want the switch to automatically turn off once it has been turned on). 2 4 0 65535 0 from to description 0 0 timer disabled (default); 1 65535 minutes 8 on off status after power failure set the on off status for the switch after power failure. 2 1 0 2 2 from to description 1 1 forced to on (regardless of state prior to power outage) 0 0 forced to off (regardless of state prior to power outage) 2 2 remembers and restores on/off status after power failure (default) 9 enable/disable scene control enable or disable scene control functionality for quick double tap triggers. 2 1 0 1 0 from to description 1 1 scene control enabled 0 0 scene control disabled (default) 11 smart bulb mode: enable/disable paddle / z wave control enable or disable local on/off control. if enabled, you’ll only be able to control the connected light via z wave. scenes and other functionality will still be available through paddles. 2 1 0 2 1 from to description 2 2 physical paddle and z wave control disabled 1 1 physical paddle control enabled (default) 0 0 physical paddle control disabled texts