- Name
- Paddle On/Off Switch
- Brand
- Zooz
- Features
- Feature Values Switch Load Capacity Volt-Ampere
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0704
- Categories
- All Lighting Devices, On/Off Switches/Devices
- Product id
- 0xA001
- S2 classes
- S2_UNAUTHENTICATED
- Device type
- On/Off Power Switch
- Oem version
- HW: 1 FW: 1.00
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0700
- Z wave version
- 6.71.03
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x0312
- Product type id
- 0xA000
- Long description
- It is an In-wall type device controlled by Z-Wave controller and can be configured in Z-Wave sensor network, if Z-Wave certified controller features remote access, you can control lights at home from your mobile phone separately, and manual On/Off light by push button .
- Hardware platform
- ZM5202
- Short description
- It is an In-wall type device controlled by Z-Wave controller and can be configured in Z-Wave sensor network, if Z-Wave certified controller features remote access.
- Product identifier
- ZW303
- Countries / regions
- United States of America
- Certification number
- ZC10-18106283
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC_V2
- Value 10 a firmware updatable value updatable by consumer by rf switch load capacity watts value 1200 w switch type value decorator paddle push with indicator color value white electric load type value incandescent fluorescent led association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 0 0 up button on,down button off 1 1 up button off,down button on 2 status led configuration status led configuration 0 1 0 0 0 from to description 0 0 output on,led off 1 1 output off,led on. 2 2 led always off 3 3 led always on 3 count down configuration count down configuration(turn off the output by time） 0 2 0 0 0 from to description 0 0 turn off the output by time 5 restores state after power failure restores state after power failure 0 1 0 0 2 from to description 0 0 output off 1 1 output on 2 2 the state before a power outage.c texts
- ID Description Value 1
