- Name
- Z-Wave Plus Double Plug
- Brand
- Zooz
- Features
- Feature Values Supported Notification Types
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0701
- Categories
- Energy Meters, All Lighting Devices, On/Off Switches/Devices
- Product id
- 0xA003
- S2 classes
- S2_UNAUTHENTICATED
- Device type
- On/Off Power Switch
- Oem version
- HW: 255 FW: 1.00
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0700
- Z wave version
- 6.71.03
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x0312
- Product type id
- 0xA000
- Long description
- It is smart plug type device controlled by Z-Wave controller and can be configured in Z-Wave sensor network, if Z-Wave certified controller features remote access, you can dim lights at home from your mobile phone separately, and manual dim light by push button .
- Hardware platform
- ZM5202
- Short description
- It is smart plug type device controlled by Z-Wave controller and can be configured in Z-Wave sensor network, if Z-Wave certified controller features remote access.
- Product identifier
- ZW47
- Countries / regions
- United States of America
- Certification number
- ZC10-18116324
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 8
- Supports explorer frames
- Yes
- Supported notification types
- Notification Type Event / State Power Management
- Supported / controlled meter types
- Meter Type Rate Type Description Electric meter
- Value power management switch load capacity watts value 1800 w firmware updatable value updatable by consumer by rf switch load capacity current value 15 a electric load type value incandescent fluorescent led inductive (e.g. motor) supported meter type value electric energy color value white association groups
- Group Number Maximum Nodes Supported End Point ID Description 3
- From to description 0 0 ep1 auto turn off timer disabled 1 1 ep1 auto turn off timer enabled 9 endpoint1 count down configuration(turn off the output by time) endpoint1 count down configuration(turn off the output by time) 0 4 0 0 60 from to description 1 65535 endpoint1 count down configuration(turn off the output by time) 10 endpoint1 enable auto turn on timer endpoint1 enable auto turn on timer 0 1 0 0 0 from to description 0 0 ep1 auto turn on timer disabled 1 1 ep1 auto turn on timer enabled 11 endpoint1 count down configuration(turn on the output by time) endpoint1 count down configuration(turn on the output by time) 0 4 0 0 60 from to description 1 65535 endpoint1 count down configuration(turn on the output by time) 1 restores state after power failure restores state after power failure 0 1 0 0 0 from to description 0 0 the state before a power outage. 1 1 outlet on 2 2 outlet off 2 power wattage report value threshold(wattage) power wattage report value threshold(wattage) 0 4 0 0 10 from to description 0 10 power wattage report value threshold(wattage) 17 status led configuration status led configuration 0 1 0 0 1 from to description 0 0 led indicator will display power consumption whenever the device is plugged in 1 1 led indicator will display power consumption whenever the device is on in and will turn off when the plug is off 2 2 led indicator will display the level of power consumption for 5 seconds only whenever the device is turned on or off 3 3 always off texts
- ID Description Value 1