- Name
- ABUS Z-Wave Multisensor
- Brand
- ABUS
- Features
- Feature Values Sensors
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_REPORTING
- User icon
- 0x0C07
- Categories
- Sensors
- Product id
- 0x0001
- S2 classes
- S2_UNAUTHENTICATED
- Device type
- Notification Sensor
- Oem version
- HW: 3 FW: 2.02
- Library type
- SLAVE_ENHANCED
- Supports nwi
- Yes
- Installer icon
- 0x0C07
- Z wave version
- 6.81.00
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x0403
- Product type id
- 0x0002
- Long description
- The ABUS Z-Wave Multisensor includes 4 sensors in one device: motion sensor, thermometer, hygrometer and light sensor. Thanks to battery operation, the Multisensor can be installed very easily (alternative operation via USB). The Multisensor also provides extensive configuration options like the transmission interval and sensitivity of the motion detector and much more.
- Hardware platform
- ZM5101
- Short description
- The ABUS Z-Wave Multisensor includes 4 sensors in one device: motion sensor, thermometer, hygrometer and light sensor.
- Product identifier
- SHBW10000
- Countries / regions
- European Union
- Supports smart start
- Yes
- Certification number
- ZC10-19016351
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Format Size Min Value Max Value Default Value Parameter Values 10
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Supported multilevel sensors
- Multilevel Sensor Type Air temperature
- Supported notification types
- Notification Type Event / State Light sensor
- Value motion/no motion (binary) air temperature luminance humidity supported notification types value luminance battery quantity value 1 firmware updatable value updatable by consumer by rf battery type value cr123 a association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 10 50 low battery power level of alarm threshold values 104 the interval time of sending the battery level reporting. 0 4 0 0 86400 from to description 0 0 the battery level reporting is disabled 1 2678400 the interval time of sending the battery level reporting is 1 seconds to 31 days = 2678400 seconds 100 set 101 ~ 104 to default 0 1 0 0 0 from to description 0 0 set 101 ~ 104 to default 101 the interval time of sending the temperature reporting 0 4 0 0 7200 from to description 0 0 the temperature reporting is disabled 1 2678400 the interval time of sending the temperature reporting is 1 seconds to 31 days = 2678400 seconds 110 enable 111 ~ 114 temperature/humidity/luminance/ battery level change reporting. 0 1 0 0 0 from to description 0 0 disabled 1 0 enabled 111 configuration temperature change threshold. 0 2 0 0 10 from to description 1 500 the temperature change threshold value(unit 0.1℃) 113 configuration luminance change threshold. 0 2 0 0 150 from to description 32767 1 luminance change threshold is 32767 to 65528 0 32766 luminance change threshold is 0 to 32766 114 configuration battery level change threshold. 0 1 0 0 10 from to description 1 100 battery level change threshold value(unit)% 102 the interval time of sending the humidity reporting. 0 4 0 0 7200 from to description 0 0 the humidity reporting is disabled 1 2678400 the interval time of sending the humidity reporting is 1 seconds to 31 days = 2678400 seconds 103 the interval time of sending the luminance reporting. 0 4 0 0 7200 from to description 0 0 the luminance reporting is disabled 1 2678400 the interval time of sending the luminance reporting is 1 seconds to 31 days = 2678400 seconds texts