Skip to main content

Loading…

Smart Switch 6 — Aeotec — Off Screen Space

Off Screen Space

Smart Switch 6

Aeotec · Plug Switch

Smart Switch 6

View all Aeotec products

Connectivity: Z-WaveCategory: Plug Switch

Z-WaveCertified

App supportiOSRecently updated· Apr 2026

Aeotec Smart Switch 6 is a low-cost Z-Wave Switch plug-in module specifically used to enable Z-Wave command and control (on/off) of any plug-in tool. It can report immediate wattage consumption or kWh energy usage over a period of time. In the event of power failure, non-volatile memory retains all programmed information relating to the unit’s operating status. Its surface has a Smart RGB LED, which can be used for indicating the output load status or strength of the wireless signal. You can configure its indication colour according to your favour. The Smart Switch 6 is also a security Z-wave device and supports Over The Air (OTA) feature for the products firmware upgrade.

Want to buy adds it to your wish list and follows Aeotec for updates. I own it adds it to your collection.

Compare

vs Competitor ▾

Connectivity

Z-Wave

Firmware

Current version HW: 60 FW: 1.03

Specifications

Overview

Company: Aeotec
Category: Plug Switch
Device type: On/Off Power Switch

Connectivity

Standard / protocol: Z-Wave
Connectivity: Z-Wave
Transport: Z-Wave
Spec version: 6.51.06
Z-Wave frequency: US: 916.00MHz, 908.40MHz

Certification & compliance

Certificate ID

Community tags

Be the first to tag this page — tags appear right away. Try a theme, capability, or subject (e.g. WWII, heist, slow burn, time travel, A24).

More specs

Name: Smart Switch 6
Brand: Aeotec
Features: Feature Values Firmware Updatable
Documents: Category Description File Manual_Primary_Lang
Role type: ROLE_TYPE_SLAVE_ALWAYS_ON
User icon: 0x0700
Categories: Energy Meters, All Lighting Devices, On/Off Switches/Devices
Product id: 0x0060
Device type: On/Off Power Switch
Oem version: HW: 96 FW: 1.04
Library type: SLAVE_ENHANCED_232
Supports nwi: Yes
Installer icon: 0x0700
Z wave version: 6.51.10
Frequency plans: US: 916.00MHz, 908.40MHz
Manufacturer id: 0x0086
Product type id: 0x0103
Long description: Aeotec Smart Switch 6 is a low-cost Z-Wave Switch plug-in module specifically used to enable Z-Wave command and control (on/off) of any plug-in tool. It can report immediate wattage consumption or kWh energy usage over a period of time. In the event of power failure, non-volatile memory retains all programmed information relating to the unit’s operating status. Its surface has a Smart RGB LED, which can be used for indicating the output load status or strength of the wireless signal. You can configure its indication colour according to your favour. The Smart Switch is also a security Z-Wave device and supports Over The Air (OTA) feature for the products firmware upgrade.
Hardware platform: ZM5101
Short description: Aeotec Smart Switch 6 is a plug-in on/off switch module that also provides energy metering.
Product identifier: ZW096-A02
Countries / regions: United States of America
Certification number: ZC10-18106250
Radio range z wave (m): 40
Configuration parameters: Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 83
Supports explorer frames: Yes
Supported command classes: Identifier Name Key Version COMMAND_CLASS_POWERLEVEL
Controlled command classes: Identifier Name Key Version COMMAND_CLASS_SWITCH_BINARY
Supported / controlled meter types: Meter Type Rate Type Description Electric meter
Value updatable by consumer by rf electric load type value incandescent fluorescent mlv (magnetic) elv (electronic) led dimmable led inductive (e.g. motor) supported meter type value electric energy association groups: Group Number Maximum Nodes Supported End Point ID Description 1

From to description 0 255 blue color value 65536 16711680 red color value 256 65535 green color value 90 enable/disable the parameter 91 and 92 enable/disable the parameter 91 and 92. 0 1 0 0 0 from to description 0 0 disable 1 1 enable 92 induce an automatic report the value here represents minimum change in wattage percent (in terms of percentage) to induce a meter report 0 1 0 0 5 from to description 0 100 the threshold can be set from 0 to 100%. 102 to set which report would be sent in report group 2 to set which report would be sent in report group 2 0 4 0 0 0 from to description 8 8 send meter report of k wh 1 1 send meter report of voltage 2 2 send meter report of current 4 4 send meter report of watt 103 to set which report would be sent in report group 3 to set which report would be sent in report group 3 0 4 0 0 0 from to description 1 1 send meter report of voltage 2 2 send meter report of current 4 4 send meter report of watt 8 8 send meter report of k wh 111 set the time interval of sending report set the time interval of sending report 0 4 0 0 3 from to description 1 2147483647 interval seconds 112 set the time interval of sending report set the time interval of sending report 0 4 0 0 600 from to description 1 2147483647 interval seconds 200 partner id partner id 0 1 0 0 0 from to description 0 0 aeon labs standard product 1 127 others 252 enable/disable configuration locked enable/disable configuration locked 0 1 0 0 0 from to description 0 0 disable 1 1 enable 3 current overload protection. current overload protection. output load will be closed after 2 minutes if the current overruns (us: 16.5 a, au: 10.5 a, eu: 14 a). 0 1 0 0 1 from to description 0 0 disabled 1 1 enabled 65 to set which report would be sent in report group 1 to set which report would be sent in report group 1 0 4 0 0 0 from to description 1 1 send meter report of voltage 2 2 send meter report of current 4 4 send meter report of watt 8 8 send meter report of k wh 66 to set which report would be sent in report group 2 to set which report would be sent in report group 2 0 4 0 0 0 from to description 1 1 send meter report of voltage 2 2 send meter report of current 4 4 send meter report of watt 8 8 send meter report of k wh 80 to set which notification would be sent to the associated nodes in association group 1 to set which notification would be sent to the associated nodes in association group 1 when the state of output load is changed. 0 1 0 0 0 from to description 0 0 nothing 1 1 hail cc 2 2 basic report cc 81 configure the state of led configure the state of led when it is in energy mode, momentary indicate mode or night light mode. 0 1 0 0 0 84 configure the brightness level of rgb led configure the brightness level of rgb led (0% 100%) when it is in energy mode/momentary indicate mode. 0 4 0 0 3289650 from to description 0 100 the brightness of red color 256 356 the brightness of yellow color 65536 65636 the brightness of green color 91 induce an automatic report the value here represents minimum change in wattage (in terms of wattage) to induce a meter report 0 2 0 0 25 from to description 0 32767 the threshold can be set from 0 to 32767 watt. 101 to set which report would be sent in report group 1 to set which report would be sent in report group 1 0 4 0 0 0 from to description 1 1 send meter report of voltage 2 2 send meter report of current 4 4 send meter report of watt 8 8 send meter report of k wh 254 device tag device tag 0 2 0 0 0 from to description 0 127 device tag 113 set the time interval of sending report set the time interval of sending report 0 4 0 0 600 from to description 1 2147483647 interval seconds 255 reset the smart switch reset the smart switch to factory default. 0 1 0 0 0 from to description 0 0 energy mode. the led will follow the status (on/off). 1 1 reset all configuration parameters to default. 1431655765 1431655765 reset the smart switch to factory default 2 2 night light mode. the led will remain the state that is set via the multilevel switch set cc or color switch set cc. 1 1 momentary indicate mode. when the state of switch’s load changed, the led will follow the status (on/off) of its load, but the led will turn off after 5 seconds if there is no any switch action. texts