
Smart Power Plug
View all Coolcam productsConnectivity: Z-WaveCategory: Plug Switch
This product can be included and operated in any Z‐Wave network with other Z‐Wave certified devices from other manufacturers and/or other applications. All non‐battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network. In the front casing, there is button that is used to carry out include, exclude or reset factory default settings on PCB Board. When power is first supplied, the LED will flash on and off with yellow alternately every 1 second intervals within 5 seconds if the detector has not been added a Z‐Wave network, otherwise the LED will flash on and off 5 times with cyan alternately every 300 millisecond. Please get familiar with the terms below before starting the operations. This Plug has function that remembers the relay states, the plug will turn on after power up next time if the plug is turn on before the power cut‐off.
Want to buy adds it to your wish list and follows Coolcam for updates. I own it adds it to your collection.
vs Competitor ▾
Connectivity
Z-Wave
Firmware
Current version HW: 65 FW: 3.70
Specifications
Overview
- Company
- Coolcam
- Category
- Plug Switch
- Device type
- On/Off Power Switch
Connectivity
- Standard / protocol
- Z-Wave
- Connectivity
- Z-Wave
- Transport
- Z-Wave
- Spec version
- 6.51.06
- Z-Wave frequency
- EU: 869.85MHz, 868.40MHz
Certification & compliance
- Certificate ID























