- Name
- Smart Plug In Switch
- Brand
- Johnson Controls
- Features
- Feature Values Color
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0700
- Categories
- Energy Meters, All Lighting Devices, On/Off Switches/Devices, Lighting Accessories
- Product id
- 0x3033
- S2 classes
- S2_UNAUTHENTICATED, S2_AUTHENTICATED
- Device type
- Binary Switch
- Oem version
- HW: 1 FW: 7.08
- Library type
- SLAVE_ENHANCED_232
- Product line
- Smart Home
- Supports nwi
- Yes
- Installer icon
- 0x0700
- Z wave version
- 7.13.7
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x012A
- Product type id
- 0x4744
- Long description
- Make any outlet smarter with the new IQ Outlet using the 700 series Z-Wave module - Turns ON/OFF incandescent, CFL, or LED lamps, and AC operated electrical appliances - 700 Series Z-Wave module - Energy monitoring supported - LED to indicate ON/OFF status - Controls appliances up to 15A - Z-Wave Plus Certified with S2 security and SmartStart (QR code with Z-Wave DSK included) - Grounded 3-pin AC power receptacle to enhance safety - Safety tab to secure to outlet - Compact design - does not block the 2nd AC outlet - Over-The-Air firmware upgrade available, if supported by controller - Supports Network Wide Inclusion (inclusion through a repeater), if supported by controller. - Functions as a Z-Wave signal repeater
- Hardware platform
- ZGM130
- Short description
- Make any outlet smarter with the new IQ Outlet using the 700 series Z-Wave module
- Product identifier
- IQ Outlet
- Countries / regions
- United States of America
- Supports smart start
- Yes
- Certification number
- ZC12-21030207
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 4
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_CONFIGURATION_V4
- Supported / controlled meter types
- Meter Type Rate Type Description Electric meter
- Value white switch load capacity current value 15 a switch load capacity watts value 900 w incandescent, 200 w cfl/led electric load type value incandescent fluorescent led inductive (e.g. motor) firmware updatable value updatable by consumer by rf outdoor use association groups
- Group Number Maximum Nodes Supported End Point ID Group Name Profile Description 2
- From to description 0 255 0 = disable energy monitoring, default 1 255 = reporting interval (minutes) 3 led mode indicator when value = 0, the led indicator will be off when the connected appliance is on, and the led indicator will be on when the connected appliance is off. if value = 1, the led indicator will be off when the connected appliance is off, and the led indicator will be on when the connected appliance is on. if value = 2, the led indicator will be always off regardless of the load status. 2 1 0 2 0 from to description 0 2 when value = 0, the led indicator will be off when the connected appliance is on, and the led indicator will be on when the connected appliance is off. if value = 1, the led indicator will be off when the connected appliance is off, and the led indicator will be on when the connected appliance is on. if value = 2, the led indicator will be always off regardless of the load status. texts
- ID Description Value 8
