- Name
- Leak Gopher Z-Wave Valve Controller
- Brand
- Leak Gopher
- Texts
- ID Description Value 1
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- ICON_TYPE_GENERIC_VALVE_OPEN_CLOSE
- Categories
- Water Valves & Irrigation
- Product id
- 0x0x02
- Device type
- Valve - Open/Close
- Oem version
- HW: 255 FW: 2.03
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- ICON_TYPE_GENERIC_VALVE_OPEN_CLOSE
- Z wave version
- 6.51.06
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x0x17
- Product type id
- 0x0x03
- Long description
- The Leak Gopher Z-Wave Valve Controller is a professionall grade Z-Wave Device that allows the water to your home or business to be automatically turned off when water is detected by water sensors connected to any Z-Wave capable controller. The Leak Gopher Z-Wave Valve Controller is Z-Wave Plus compliant allowing you to use all of the functionality and programmability built into the new, Z-Wave Plus Controllers. It comes with a Stainless Steel Electronic Ball Valve. Design and Operation of The Leak Gopher Valve Controller Simply install the stainless steel Electronic Ball Valve on the ¾”, 1", 1 1/4", 1 1/2", or 2" water line where water enters your home or business, attach it to the Leak Gopher by plugging in the RJ-11 telephone jack, and learn it in to your Z-Wave Controller and your home or business is protected. Standard telephone wires and connectors can be used to extend the Ball Valve’s wire so it is easy to locate the Electronic Ball Valve where you need it to be, and still have easy access to the Leak Gopher Z-Wave Valve Controller. When any of your water sensors get wet, your Z-Wave Controller will tell the Leak Gopher to turn the water off and Voilà! No Flood! A fully capable Z-Wave device, you can also program scenes that allow your Leak Gopher to turn the water off when you leave home and arm your security system and back on when you get home. No more worries about your house flooding while you are away. Also, for your convenience and piece of mind, there are two buttons on the Leak Gopher that allow you to instantly turn your water off and on. No more looking for that water key and digging in the yard looking for your water meter!
- Hardware platform
- ZM5202
- Short description
- Electronic water valve to turn water off when leaks are detected by water sensors attached to a Z-Wave controller. Also allows remote control of water using any Z-Wave controller.
- Association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- Product identifier
- LGZWVS-1
- Countries / regions
- United States of America
- Certification number
- ZC10-16025006
- Radio range z wave (m)
- 40
- Supports explorer frames
- Yes