Skip to main content

Loading…

In-Wall Dimmer — Oomi — Off Screen Space

Off Screen Space

In-Wall Dimmer

Oomi · Lighting

In-Wall Dimmer

View all Oomi products

Connectivity: Z-WaveCategory: Lighting

Z-WaveCertified

Oomi In-Wall Dimmer is a Z-Wave Smart Dimmer specifically used to enable Z-Wave command and control (on/off/dim) of any wall switches. It can report immediate wattage consumption or kWh energy usage over a period of time. In the event of power failure, non-volatile memory retains all programmed information relating to the unit’s operating status. It can connect to 2 external manual switches to control the load ON/OFF independently. Its surface has a pin socket, which can be used for connecting to the touch panel, so you can also use the touch panel to control the Nano Dimmer. The In-Wall Dimmer is also a security Z-Wave plus device and supports Over The Air (OTA) feature for the products firmware upgrade.

Want to buy adds it to your wish list and follows Oomi for updates. I own it adds it to your collection.

Compare

vs Competitor ▾

Connectivity

Z-Wave

Firmware

Current version HW: 111 FW: 1.02:01.02

Specifications

Overview

Company: Oomi
Category: Lighting
Device type: Light Dimmer Switch

Connectivity

Standard / protocol: Z-Wave
Connectivity: Z-Wave
Transport: Z-Wave
Spec version: 6.51.09
Z-Wave frequency: HK: 919.80MHz, 919.80MHz

Certification & compliance

Certificate ID

Community tags

Be the first to tag this page — tags appear right away. Try a theme, capability, or subject (e.g. WWII, heist, slow burn, time travel, A24).

More specs

Name: In-Wall Dimmer
Brand: Oomi
Features: Feature Values Color
Documents: Category Description File Manual_Primary_Lang
Role type: ROLE_TYPE_SLAVE_ALWAYS_ON
User icon: 0x0600
Categories: Energy Meters, All Lighting Devices, Dimming Lighting Devices
Product id: 0x006F
Device type: Light Dimmer Switch
Oem version: HW: 111 FW: 1.02:01.02
Library type: SLAVE_ENHANCED_232
Supports nwi: Yes
Installer icon: 0x0600
Z wave version: 6.51.09
Frequency plans: HK: 919.80MHz, 919.80MHz
Manufacturer id: 0x016A
Product type id: 0x0303
Long description: Oomi In-Wall Dimmer is a Z-Wave Smart Dimmer specifically used to enable Z-Wave command and control (on/off/dim) of any wall switches. It can report immediate wattage consumption or kWh energy usage over a period of time. In the event of power failure, non-volatile memory retains all programmed information relating to the unit’s operating status. It can connect to 2 external manual switches to control the load ON/OFF independently. Its surface has a pin socket, which can be used for connecting to the touch panel, so you can also use the touch panel to control the Nano Dimmer. The In-Wall Dimmer is also a security Z-Wave plus device and supports Over The Air (OTA) feature for the products firmware upgrade.
Hardware platform: ZM5101
Short description: Oomi In-Wall Dimmer is a Z-Wave Smart Dimmer specifically used to enable Z-Wave command and control (on/off/dim) of any wall switches also provides energy metering.
Product identifier: FT111-D
Countries / regions: Hong Kong
Certification number: ZC10-17095781
Configuration parameters: Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 4
Supports explorer frames: Yes
Supported command classes: Identifier Name Key Version COMMAND_CLASS_SCENE_ACTUATOR_CONF
Controlled command classes: Identifier Name Key Version COMMAND_CLASS_BASIC
Supported notification types: Notification Type Event / State Heat Alarm
Supported / controlled meter types: Meter Type Rate Type Description Electric meter
Value white electric load type value incandescent fluorescent elv (electronic) led dimmable led inductive (e.g. motor) firmware updatable value updatable by consumer by rf neutral wire required supported meter type value electric energy supported notification types value heat alarm power management switch type value toggle z wave scene type value scene association groups: Group Number Maximum Nodes Supported End Point ID Description 1

From to description 0 0 disable 1 1 enable 3 current overload protection. output load will be turned off automatically after 30 seconds and if the current overrun 1.5 a. 0 1 0 0 1 from to description 1 1 enable 0 0 disable 82 to set which notification would be sent to the associated nodes in association group 4 to set which notification would be sent to the associated nodes in association group 4 when using the external switch 2 to switch the loads. 0 1 0 0 1 from to description 0 0 send nothing 1 1 send basic set cc 85 set appointment 1 set the on time of output load. 0 4 0 0 1573017 from to description 0 99 the brightness level 256 316 the minute value of on time 65536 65560 the hour value of on time 16777215 16777222 the day value (mon to sun) 110 set parameter 111 113 to default value. set parameter 111 113 to default value. 0 1 0 0 0 from to description 0 0 reset the parameter 111 113 111 set the interval of automatic report for report group 1. set the interval of automatic report for report group 1. 0 4 0 0 3 from to description 1 2147483647 the range of interval time is 1 to 2147483647. 112 set the interval of automatic report for report group 2. set the interval of automatic report for report group 2. 0 4 0 0 600 from to description 1 2147483647 the range of interval time is 1 to 2147483647. 113 set the interval of automatic report for report group 2. set the interval of automatic report for report group 3. 0 4 0 0 600 from to description 1 2147483647 the range of interval time is 1 to 2147483647. 120 configure the external switch mode for s1. configure the external switch mode for s1. 0 1 0 0 0 from to description 0 0 enter automatic identification mode 1 1 momentary push button mode 2 2 3 way switch mode 3 3 2 state switch mode 121 configure the external switch mode for s2. configure the external switch mode for s2. 0 1 0 0 0 from to description 1 1 momentary push button mode 2 2 3 way switch mode 3 3 2 state switch mode 0 0 enter automatic identification mode 122 get the state of touch panel port get the state of touch panel port 0 1 0 0 0 from to description 0 0 the touch panel is not connected. 5 5 the touch panel is connected. 123 set the control destination for external switch s1 set the control destination for external switch s1 0 1 0 0 3 from to description 1 1 control the output loads of itself. 2 2 control the other nodes 3 3 control the output loads of itself and other nodes. 124 set the control destination for external switch s2 set the control destination for external switch s2. 0 1 0 0 3 from to description 1 1 control the output loads of itself. 2 2 control the other nodes. 3 3 control the output loads of itself and other nodes 125 set the default dimming rate. set the default dimming rate. 0 1 0 0 3 from to description 1 255 the value range is 1 to 255 seconds. 129 set the dimming principle set the dimming principle. 0 1 0 0 1 from to description 0 0 trailing edge mode 1 1 leading edge mode 130 to get what type of load the dimmer is connected to. to get what type of load the dimmer is connected to. note: this parameter is a get only parameter. 0 1 0 0 0 from to description 1 1 resistive load 2 2 capacitive load 0 0 unknown load. 3 3 inductive load 131 set the min brightness level that the load can reach to. set the min brightness level that the load can reach to. 0 1 0 0 0 from to description 0 99 the level range is 0 to 99. 132 set the max brightness level that the load can reach to. note: set the max brightness level that the load can reach to. note: 0 1 0 0 99 from to description 0 99 the level range is 0 to 99. 249 set the recognition way of load set the recognition way of load 0 1 0 0 2 from to description 0 0 never recognize the load when power on 1 1 only recognize once when first power on 2 2 recognize the load once power on 252 lock/unlock configuration parameters lock/unlock configuration parameters. 0 1 0 0 0 from to description 0 0 unlock 1 1 lock 255 reset the in wall dimmer reset the in wall dimmer to factory default. 0 4 0 0 0 from to description 0 0 reset all configuration parameters to factory default setting 1431655765 1431655765 reset to factory default setting and removed from the z wave network 80 to set which notification would be sent to the associated devices (group 1) to set which notification would be sent to the associated devices (group 1) when the state of nano dimmer’s load is changed. 0 1 0 0 0 from to description 1 1 send hail cc 2 2 send basic cc report 3 3 send multilevel switch report 0 0 send nothing 4 4 send hail cc when using the manual switch to change the load state. 81 to set which notification would be sent to the associated nodes in association group 3 to set which notification would be sent to the associated nodes in association group 3 when using the external switch 1 to switch the loads. 0 1 0 0 1 from to description 0 0 send nothing 1 1 send basic set cc 86 set appointment 2 set the on time of output load. 0 4 0 0 2293760 from to description 0 99 the brightness level 256 316 the minute value of on time 65536 65560 the hour value of on time 16777215 16777222 the day value (mon to sun) 90 enables/disables parameter 91 and 92 below: enables/disables the function of parameter 91 and 92. 0 1 0 0 0 from to description 0 0 disable 1 1 enable 91 set the threshold value of wattage. threshold change in wattage (in terms of wattage) to induce an automatic report. 0 2 0 0 25 from to description 0 60000 the thershold value range is 0 to 60000 92 set the threshold value of wattage. threshold change in wattage (in terms of percentage) to induce an automatic report. 0 1 0 0 5 from to description 0 100 the thershold value range is 0 to 100 100 set parameter 101 103 to default value. set parameter 101 103 to default value. 0 1 0 0 0 from to description 0 0 reset the parameter 101 103 101 to set which reports need to be sent in report group 1. to set which reports need to be sent in report group 1. 0 4 0 0 0 102 to set which reports need to be sent in report group 2. to set which reports need to be sent in report group 2. 0 1 0 0 0 from to description 1 1 send meter report of voltage (v) 2 2 send meter report of current (a) 4 4 send meter report of wattage (w) 8 8 send meter report of energy (k wh) 103 to set which reports need to be sent in report group 3. to set which reports need to be sent in report group 3. 0 1 0 0 0 from to description 1 1 send meter report of voltage (v) 2 2 send meter report of current (a) 4 4 send meter report of wattage (w) 8 8 send meter report of energy (k wh) 128 get the current working mode get the current working mode. note: this parameter is a get only parameter. 0 1 0 0 0 from to description 0 0 unknown working mode. 1 1 2 wire mode 2 2 3 wire mode texts