Skip to main content

Loading…

Dual In-Wall Switch — Oomi — Off Screen Space

Off Screen Space

Dual In-Wall Switch

Oomi · Plug Switch

Dual In-Wall Switch

View all Oomi products

Connectivity: Z-WaveCategory: Plug Switch

Z-WaveCertified

Oomi Dual In-Wall Switch is a Z-Wave Smart Switch specifically used to enable Z-Wave command and control (on/off) of any wall switches. It can report immediate wattage consumption or kWh energy usage over a period of time. In the event of power failure, non-volatile memory retains all programmed information relating to the unit’s operating status. It can connect to 2 external manual switches to control the load ON/OFF independently. Its surface has a pin socket, which can be used for connecting to the touch panel, so you can also use the touch panel to control the Dual Nano Switch. The Dual In-Wall Switch is also a security Z-Wave device and supports Over The Air (OTA) feature for the products firmware upgrade.

Want to buy adds it to your wish list and follows Oomi for updates. I own it adds it to your collection.

Compare

vs Competitor ▾

Connectivity

Z-Wave

Firmware

Current version HW: 132 FW: 1.02:01.00

Specifications

Overview

Company: Oomi
Category: Plug Switch
Device type: On/Off Power Switch

Connectivity

Standard / protocol: Z-Wave
Connectivity: Z-Wave
Transport: Z-Wave
Spec version: 6.51.09
Z-Wave frequency: HK: 919.80MHz, 919.80MHz

Certification & compliance

Certificate ID

Community tags

Be the first to tag this page — tags appear right away. Try a theme, capability, or subject (e.g. WWII, heist, slow burn, time travel, A24).

More specs

Name: Dual In-Wall Switch
Brand: Oomi
Features: Feature Values Electric Load Type
Documents: Category Description File Manual_Primary_Lang
Role type: ROLE_TYPE_SLAVE_ALWAYS_ON
User icon: 0x0700
Categories: Energy Meters, All Lighting Devices, On/Off Switches/Devices
Product id: 0x0084
Device type: On/Off Power Switch
Oem version: HW: 132 FW: 1.02:01.00
Library type: SLAVE_ENHANCED_232
Supports nwi: Yes
Installer icon: 0x0700
Z wave version: 6.51.09
Frequency plans: HK: 919.80MHz, 919.80MHz
Manufacturer id: 0x016A
Product type id: 0x0303
Long description: Oomi Dual In-Wall Switch is a Z-Wave Smart Switch specifically used to enable Z-Wave command and control (on/off) of any wall switches. It can report immediate wattage consumption or kWh energy usage over a period of time. In the event of power failure, non-volatile memory retains all programmed information relating to the unit’s operating status. It can connect to 2 external manual switches to control the load ON/OFF independently. Its surface has a pin socket, which can be used for connecting to the touch panel, so you can also use the touch panel to control the Dual Nano Switch. The Dual In-Wall Switch is also a security Z-Wave device and supports Over The Air (OTA) feature for the products firmware upgrade.
Hardware platform: ZM5101
Short description: Oomi Dual In-Wall Switch is a Z-Wave Smart Switch specifically used to enable Z-Wave command and control (on/off) of any wall switches also provides energy metering.
Product identifier: FT132-D
Countries / regions: Hong Kong
Certification number: ZC10-17095773
Configuration parameters: Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 84
Supports explorer frames: Yes
Supported command classes: Identifier Name Key Version COMMAND_CLASS_SCENE_ACTUATOR_CONF
Controlled command classes: Identifier Name Key Version COMMAND_CLASS_BASIC
Supported notification types: Notification Type Event / State Heat Alarm
Supported / controlled meter types: Meter Type Rate Type Description Electric meter
Value incandescent fluorescent mlv (magnetic) elv (electronic) led dimmable led inductive (e.g. motor) firmware updatable value updatable by consumer by rf supported meter type value electric energy supported notification types value heat alarm power management switch type value toggle z wave scene type value scene association groups: Group Number Maximum Nodes Supported End Point ID Description 1

From to description 65536 65596 the minute time of on 16777216 16777276 the hour time of on 0 60 the minute time of off 256 316 the hour time of off 86 set appointment 1 set the on time of output load. 0 4 0 0 8327680 from to description 16777215 16777215 disable the setting. 0 60 the minute value of on time 65536 65543 the day value (mon to sun) 16777216 16777216 enable the setting. 256 316 the hour value of on time 87 set appointment 2 set the off time of output load. 0 4 0 0 8327680 from to description 256 316 the hour value of on time 65536 65543 the day value (mon to sun) 16777215 16777215 disable the setting. 0 60 the minute value of on time 16777216 16777216 enable the setting. 111 set the interval of automatic report for report group 1. set the interval of automatic report for report group 1. 0 4 0 0 10 from to description 1 2147483647 the range of interval time is 1 to 2147483647. 112 set the interval of automatic report for report group 2. set the interval of automatic report for report group 2. 0 4 0 0 600 from to description 1 2147483647 the range of interval time is 1 to 2147483647. 113 set the interval of automatic report for report group 2. set the interval of automatic report for report group 3. 0 4 0 0 600 from to description 1 2147483647 the range of interval time is 1 to 2147483647. 120 configure the external switch mode for s1. configure the external switch mode for s1. 0 1 0 0 0 from to description 0 0 unidentified mode 1 1 2 state switch mode 2 2 3 way switch mode 3 3 momentary push button mode 4 4 enter automatic identification mode 121 configure the external switch mode for s2. configure the external switch mode for s2. 0 1 0 0 0 from to description 4 4 enter automatic identification mode 0 0 unidentified mode 3 3 momentary push button mode 1 1 2 state switch mode 2 2 3 way switch mode 122 set the control destination for external switch set the control destination for external switch 0 1 0 0 3 from to description 1 1 control the output loads of itself. 2 2 control the other nodes 3 3 control the output loads of itself and other nodes. 3 current overload protection. output load will be turned off automatically after 30 seconds and if the current overrun 10.5 a. 0 1 0 0 1 from to description 1 1 enable 0 0 disable 4 overheat protection. output load will be turned off automatically after 30 seconds and if the temperature of product inside exceeds 100 ℃. 0 1 0 0 0 from to description 1 1 enable 0 0 disable 80 to set which notification would be sent to the associated devices (group 1) to set which notification would be sent to the associated devices (group 1) when the state of dual nano switchr’s load is changed. 0 1 0 0 0 from to description 0 0 send nothing 1 1 send hail cc 3 3 send hail cc when using the manual switch to change the load state. 2 2 send basic cc report 81 to set which notification would be sent to the associated nodes in association group 3 to set which notification would be sent to the associated nodes in association group 3 when using the external switch 1 to switch the loads. 0 1 0 0 1 from to description 0 0 send nothing 1 1 send basic set cc 82 to set which notification would be sent to the associated nodes in association group 4 to set which notification would be sent to the associated nodes in association group 4 when using the external switch 2 to switch the loads. 0 1 0 0 1 from to description 0 0 send nothing 1 1 send basic set cc 83 configure the state of led when it is in 3 modes configure the state of led when it is in 3 modes (energy mode, momentary indicate mode, night light mode) 0 1 0 0 0 from to description 2 2 night light mode. the led will remain on state. 0 0 energy mode. the led will follow the status (on/off). 1 1 momentary indicate mode. when the state of switch’s load changed, the led will follow the status (on/off) of its load, but the led will turn off after 5 seconds if there is no any switch action. 90 enables/disables parameter 91 and 92 below: enables/disables the function of parameter 91 and 92. 0 1 0 0 0 from to description 0 0 disable 1 1 enable 91 set the threshold value of wattage. threshold change in wattage (in terms of wattage) to induce an automatic report. 0 2 0 0 25 from to description 0 60000 the thershold value range is 0 to 60000 92 set the threshold value of wattage. threshold change in wattage (in terms of percentage) to induce an automatic report. 0 1 0 0 5 from to description 0 100 the thershold value range is 0 to 100 100 set parameter 101 103 to default value. set parameter 101 103 to default value. 0 1 0 0 0 from to description 0 0 reset the parameter 101 103 101 to set which reports need to be sent in report group 1. to set which reports need to be sent in report group 1. 0 4 0 0 0 from to description 4 4 send meter report of voltage (v) 2 2 send meter report of wattage (w) 2048 2048 send multi channel meter report of energy (k wh) on channel 1 512 512 send multi channel meter report of wattage (w) on channel 2 1048576 1048576 send multi channel meter report of current (a) on channel 2 256 256 send multi channel meter report of wattage (w) on channel 1 65536 65536 send multi channel meter report of voltage (v) on channel 1 524288 524288 send multi channel meter report of current (a) on channel 1 8 8 send meter report of current (a) 131072 131072 send multi channel meter report of voltage (v) on channel 2 1 1 send meter report of energy (k wh) 4096 4096 send multi channel meter report of energy (k wh) on channel 2 102 to set which reports need to be sent in report group 2. to set which reports need to be sent in report group 2. 0 1 0 0 0 from to description 1 1 send meter report of energy (k wh) 2 2 send meter report of wattage (w) 4 4 send meter report of voltage (v) 8 8 send meter report of current (a) 256 256 send multi channel meter report of wattage (w) on channel 1 512 512 send multi channel meter report of wattage (w) on channel 2 2048 2048 send multi channel meter report of energy (k wh) on channel 1 4096 4096 send multi channel meter report of energy (k wh) on channel 2 65536 65536 send multi channel meter report of voltage (v) on channel 1 131072 131072 send multi channel meter report of voltage (v) on channel 2 524288 524288 send multi channel meter report of current (a) on channel 1 1048576 1048576 send multi channel meter report of current (a) on channel 2 103 to set which reports need to be sent in report group 3. to set which reports need to be sent in report group 3. 0 1 0 0 0 from to description 65536 65536 send multi channel meter report of voltage (v) on channel 1 131072 131072 send multi channel meter report of voltage (v) on channel 2 524288 524288 send multi channel meter report of current (a) on channel 1 1048576 1048576 send multi channel meter report of current (a) on channel 2 1 1 send meter report of voltage (v) 2 2 send meter report of current (a) 4 4 send meter report of wattage (w) 8 8 send meter report of energy (k wh) 512 512 send multi channel meter report of wattage (w) on channel 2 2048 2048 send multi channel meter report of energy (k wh) on channel 1 4096 4096 send multi channel meter report of energy (k wh) on channel 2 256 256 send multi channel meter report of wattage (w) on channel 1 110 set parameter 111 113 to default value. set parameter 111 113 to default value. 0 1 0 0 0 from to description 0 0 reset the parameter 111 113 252 lock/unlock configuration parameters lock/unlock configuration parameters. 0 1 0 0 0 from to description 0 0 unlock 1 1 lock 255 reset the dual in wall switch reset the dual in wall switch to factory default. 0 4 0 0 0 from to description 0 0 reset all configuration parameters to factory default setting 1431655765 1431655765 reset to factory default setting and removed from the z wave network texts