Smart energy plug in switch

Loading…

Smart energy plug in switch — Philio — Off Screen Space

This plug-in ON/OFF switch PAN16 is a security enabled Z-Wave Plus product, based on Z-Wave Plus technology. The device will enable security mode automatically if the controller supports security mode, too. Z-Wave PlusTM enabled devices displaying the Z-Wave PlusTM logo can also be used with it regardless of the manufacturer, and can also be used in other manufacturer’s Z-WaveTM enabled networks. Remote On/Off control of the connected load is possible with other manufacturer’s wireless Controller. Each switch is designed to act as a repeater. Repeaters will re-transmit the RF signal to ensure that the signal is received by its intended destination by routing the signal around obstacles and radio dead spots. Because PAN16 supports Security Command Class, it can learn with a Secured enabled Z-Wave controller to fully utilize the device. Its functionality and supported command classes is identical when included as a secure and non-secure device. This plug-in ON/OFF switch is able to detect instance wattage (3000W/230Vac) (13Ampere) and overload current (14.5A with resistive load) of connected lights or appliances. When detecting overload state, the Switch will be disabled and its On/Off button will be lockout of which LED will flash quickly. However, unplug and re-connect the switch will reset its overload condition to normal status. Adding to Z-WaveTM Network In the front casing, there is an On/Off button with LED indicator which is used to toggle switch on and off or carry out inclusion, exclusion, reset or association. When first power is applied, its LED flashes on and off alternately and repeatedly at 0.5 second intervals. It implies that it has not been assigned a node ID and start auto inclusion. Auto Inclusion The function of auto inclusion will be executed as long as the switch does not have Node ID and just plug the switch into a wall outlet. Note: Auto inclusion timeout is 2 minute during which the node information of explorer frame will be emitted once several seconds. Unlike “inclusion” function as shown in the table below, the execution of auto inclusion is free from pressing the On/Off button on the Switch.

More specs

Name: Smart energy plug in switch
Brand: Philio
Features: Feature Values Switch Load Capacity Watts
Documents: Category Description File Manual_Primary_Lang
Role type: ROLE_TYPE_SLAVE_ALWAYS_ON
User icon: 0x0700
Categories: Energy Meters, All Lighting Devices, On/Off Switches/Devices
Product id: 0x0029
Device type: On/Off Power Switch
Oem version: HW: 1 FW: 1.02
Library type: SLAVE_ENHANCED_232
Supports nwi: Yes
Installer icon: 0x0700
Z wave version: 6.51.09
Frequency plans: EU: 869.85MHz, 868.40MHz
Manufacturer id: 0x013C
Product type id: 0x0001
Long description: This plug-in ON/OFF switch PAN16 is a security enabled Z-Wave Plus product, based on Z-Wave Plus technology. The device will enable security mode automatically if the controller supports security mode, too. Z-Wave PlusTM enabled devices displaying the Z-Wave PlusTM logo can also be used with it regardless of the manufacturer, and can also be used in other manufacturer’s Z-WaveTM enabled networks. Remote On/Off control of the connected load is possible with other manufacturer’s wireless Controller. Each switch is designed to act as a repeater. Repeaters will re-transmit the RF signal to ensure that the signal is received by its intended destination by routing the signal around obstacles and radio dead spots. Because PAN16 supports Security Command Class, it can learn with a Secured enabled Z-Wave controller to fully utilize the device. Its functionality and supported command classes is identical when included as a secure and non-secure device. This plug-in ON/OFF switch is able to detect instance wattage (3000W/230Vac) (13Ampere) and overload current (14.5A with resistive load) of connected lights or appliances. When detecting overload state, the Switch will be disabled and its On/Off button will be lockout of which LED will flash quickly. However, unplug and re-connect the switch will reset its overload condition to normal status. Adding to Z-WaveTM Network In the front casing, there is an On/Off button with LED indicator which is used to toggle switch on and off or carry out inclusion, exclusion, reset or association. When first power is applied, its LED flashes on and off alternately and repeatedly at 0.5 second intervals. It implies that it has not been assigned a node ID and start auto inclusion. Auto Inclusion The function of auto inclusion will be executed as long as the switch does not have Node ID and just plug the switch into a wall outlet. Note: Auto inclusion timeout is 2 minute during which the node information of explorer frame will be emitted once several seconds. Unlike “inclusion” function as shown in the table below, the execution of auto inclusion is free from pressing the On/Off button on the Switch.
Hardware platform: SD3502
Short description: This plug-in ON/OFF switch PAN16 is a security enabled Z-Wave Plus product, based on Z-Wave Plus technology.
Product identifier: PAN16-3
Countries / regions: European Union
Certification number: ZC10-18116321
Radio range z wave (m): 40
Configuration parameters: Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
Supports explorer frames: Yes
Supported command classes: Identifier Name Key Version COMMAND_CLASS_POWERLEVEL
Supported / controlled meter types: Meter Type Rate Type Description Electric meter
Value 3000 watts firmware updatable value updatable by consumer by rf electric load type value incandescent fluorescent elv (electronic) led supported meter type value electric energy color value white switch load capacity current value 13 amps switch type value push button association groups: Group Number Maximum Nodes Supported End Point ID Description 1

From to description 1 32767 720*5s=3600s=1 hour 2 kwh meter report period if the setting is configured for 1hour (set value =6), the pan16 will report its accumulated power consumption (kw/h) every 1 hour to group1 node. the maximum interval to report its accumulated power consumption (kw/h) is 227.55 days (10min*32767/1440=227.55 days). 0 2 0 0 6 from to description 1 32767 6*10min=1 hour 4 threshold of kwh for load caution this is a warning when the kwh of load over the preset threshold value, if the setting value is 10000, when the accumulated power consumption of relay1 over this value, pan16 will send kwh meter report to warn the group1 node, minimum value is 1 kwh and default value is 10000 k wh. 0 2 0 0 10000 from to description 1 10000 10000*1 kwh=10000 kwh 5 restore switch state mode whenever the ac power return from lost, pan16 will restore the switch state which could be switch off、last switch state、switch on. the default setting is last switch state. 0 1 0 0 1 from to description 2 2 2 : switch on 0 0 0 : switch off 1 1 1 : last switch state 6 mode of switch off function when the mode of switch on/off is set to 0, any command of switch off will be disabled and the on/off function of include button will be disabled. the default setting is enable mode. when manual on/off function is disabled, the rf command can only switch on but not off. this is useful function for keeping the device in switch on state. 0 1 0 0 1 from to description 0 0 0 : disable 1 1 1 : enable 7 led indication mode 1. show switch state：when switch is on, led is on. when switch is off, led is off. the default setting is show switch state. 2. show night mode：when switch is on, led is off. when switch is off, led is on. 3. one flash mode：when the state of switch changes, led will be on only one second, then led keeps off. 0 1 0 0 1 from to description 3 3 3 : one flash mode 2 2 2 : show night mode 1 1 1 : show switch state 8 auto off timer whenever pan16 switches to on, the auto off timer begin to count down. after the timer decrease to zero, it will switch to off automatically. however if auto off timer is set as 0, the auto off function will be disabled. the default setting is 0. 0 2 0 0 0 from to description 0 0 0 : disable auto off function 1 32767 1s ~ 32767s 11 manual switch report mode whenever pan16 manually switch on or off, it will send binary switch report to the node of group1. the default setting is enable the function. 0 1 0 0 1 from to description 0 0 0 : disable 1 1 1 : enable 3 threshold of current for load caution this is a warning when the current of load over the preset threshold value, if the setting value is 1300, when the load current of relay1 over this value, pan16 will send current meter report to warn the group1 node, the range of the setting value is from 10 to 1300,and the default value is 1300. 0 2 0 0 1300 from to description 10 1300 1300*0.01 a = 13 a 9 rf off command mode whenever a switch off command, basic set、binary switch set、switch all off, is received, it could be interpreted as 4 variety of commands. 1. switch off：it switches to off state. the default setting is switch off. 2. ignore：the switch off command will be ignored. 3. switch toggle：it switches to the inverse of current state. 4. switch on：it switches to on state. 0 1 0 0 0 from to description 0 0 0 : switch off 1 1 1 : ignore 2 2 2 : switch toggle 3 3 3 : switch on texts

Connectivity

Firmware

Specifications

Overview

Connectivity

Certification & compliance

Community tags

Community

Edit history

Firmware & software

Identity & commercial

Lifecycle

More specs

Similar Plug Switch

More from Philio