- Name
- Датчик протечки (Leakage sensor)
- Brand
- Philio Technology
- Features
- Feature Values Supported Notification Types
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_REPORTING
- User icon
- 0x0C05
- Categories
- Sensors
- Product id
- 0x001F
- Device type
- Notification Sensor
- Oem version
- HW: 1 FW: 1.14:ERROR
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0C05
- Z wave version
- 6.51.06
- Frequency plans
- RU: 869.00MHz
- Manufacturer id
- 0x013C
- Product type id
- 0x0002
- Long description
- This is a Z-WaveTM plus product, it supports security OTA with the newest features of the Z-Wave technology. Z-Wave is a wireless communication protocol designed for home automation, specifically to remotely control applications in residential and light commercial environments. The technology uses a low-power RF radio embedded or retrofitted into home electronics devices and systems, such as lighting, home access control, entertainment systems and household appliances
- Hardware platform
- SD3502
- Short description
- The flood multisensor PAT02 has flood, temperature and humidity, 3 sensors function in one, based on Z-WaveTM technology.
- Product identifier
- PAT02-5A
- Countries / regions
- Russian Federation
- Certification number
- ZC10-18036044
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 6
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_SENSOR_MULTILEVEL_V5
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Supported multilevel sensors
- Multilevel Sensor Type Air temperature
- Supported notification types
- Notification Type Event / State Water Alarm
- Value water alarm home security sensors value air temperature humidity association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 6 6 bit6: disable the humidity report after event triggered. (1:disable, 0:enable) 7 customer function customer function switch, using bit control. bit3: disable send out basic off after the flood event cleared. (1:disable, 0:enable) bit4: notification type, 0: using notification report. 1: using sensor binary report bit5: disable multi cc in auto report. (1:disable, 0:enable) bit6: disable to report battery state when the device triggered. (1:disable, 0:enable) 0 1 0 0 0 from to description 3 3 bit3: disable send out basic off after the flood event cleared. (1:disable, 0:enable) 4 4 bit4: notification type, 0: using notification report. 1: using sensor binary report. 5 5 bit5: disable multi cc in auto report. (1:disable, 0:enable) 6 6 bit6: disable to report battery state when the device triggered. (1:disable, 0:enable) 2 basic set on level setting the basic command value. when the flood trigger on(0x ff), send the basic cc to the group 2. 0 1 0 0 127 from to description 128 127 setting the basic command value. when the flood trigger on(0x ff), send the basic cc to the group 2. 5 operation mode operation mode. using bit to control. bit0: disable the flood function bit3: setting the temperature scale. 0: fahrenheit, 1:celsius bit5: disable the temperature report after event triggered. (1:disable, 0:enable) 0 1 0 0 0 from to description 5 5 bit5: disable the temperature report after event triggered. (1:disable, 0:enable) 0 0 bit0: disable the flood function. 3 3 bit3: setting the temperature scale. 0: fahrenheit, 1:celsius 1 basic set off level setting the basic command value. when the flood trigger off(0x00), send the basic cc to the group 2. 0 1 0 0 0 from to description 128 127 setting the basic command value. when the flood trigger off(0x00), send the basic cc to the group 2. 23 humidity differential report the humidity differential to report. 0 means turn off this function. the unit is percentage. enable this function the device will detect every 10 seconds. 0 1 0 0 5 from to description 0 60 the humidity differential to report. 0 means turn off this function. the unit is percentage. enable this function the device will detect every 10 seconds. texts