Skip to main content

Loading…

Датчик открытия (Door sensor) — Philio Technology — Off Screen Space

Off Screen Space

Датчик открытия (Door sensor)

Philio Technology · Sensor

Датчик открытия (Door sensor)

View all Philio Technology products

Connectivity: Z-WaveCategory: Sensor

Z-WaveCertified

The slim multisensor PST02-1C has door/window, temperature and illumination, 3 sensors function in one,based on Z-Wave technology It is the Z-WaveTM plus product, it support the security, OTA... Those newest features of the Z-WaveTM technology. Z-WaveTM is a wireless communication protocol designed for home automation, specifically to remotely control applications in residential and light commercial environments. The technology uses a low-power RF radio embedded or retrofitted into home electronics devices and systems, such as lighting, home access control, entertainment systems and household appliances.

Want to buy adds it to your wish list and follows Philio Technology for updates. I own it adds it to your collection.

Compare

vs Competitor ▾

Connectivity

Z-Wave

Firmware

Current version HW: 1 FW: 1.29:01.20

Specifications

Overview

Company: Philio Technology
Category: Sensor
Device type: Notification Sensor

Connectivity

Standard / protocol: Z-Wave
Connectivity: Z-Wave
Transport: Z-Wave
Spec version: 6.51.02
Z-Wave frequency: RU: 869.00MHz

Certification & compliance

Certificate ID

Community tags

Be the first to tag this page — tags appear right away. Try a theme, capability, or subject (e.g. WWII, heist, slow burn, time travel, A24).

From to description 1 1 bit1: 1 means test mode, 0 means normal mode. notice: this bit only effect by the dip switch setting to “customer mode”, otherwise it decides by dip switch setting to test or normal mode. 2 2 disable the door/window function. (1:disable, 0:enable) 3 3 bit3: setting the temperature scale. 0: fahrenheit, 1:celsius 4 4 bit4: disable the illumination report after event triggered. (1:disable, 0:enable) 5 5 bit5: disable the temperature report after event triggered. (1:disable, 0:enable) 6 mult sensor function switch multisensor function switch. using bit to control. caution: the value is unsigned byte, the range is from 0x00 ~ 0x ff. bit0: disable magnetic integrate illumination to turn on the lighting nodes in the association group 2. (1:disable, 0:enable) bit4: disable delay 5 seconds to turn off the light, when door/window bit5: disable auto turn off the light, after door/window opened to turn on the light. (1:disable, 0:enable) notice: if bit2 is zero, this setting is useless. notice: if the configuration no.9 is zero, this setting is useless. 0 1 0 0 4 from to description 0 0 bit0: disable magnetic integrate illumination to turn on the lighting nodes in the association group 2. (1:disable, 0:enable) 4 4 bit4: disable delay 5 seconds to turn off the light, when door/window 5 5 bit5: disable auto turn off the light, after door/window opened to turn on the light. (1:disable, 0:enable) notice: if bit2 is zero, this setting is useless. notice: if the configuration no.9 is zero, this setting is useless. 7 customer function customer function switch, using bit control. caution: the value is unsigned byte, the range is from 0x00 ~ 0x ff bit3: disable send out basic off after door closed. (1:disable, 0:enable) bit4: notification type, 0: using notification report. 1: using sensor binary report bit5: disable multi cc in auto report. (1:disable, 0:enable) bit6: disable to report battery state when the device triggered. (1:disable, 0:enable) 0 1 0 0 4 from to description 3 3 bit3: disable send out basic off after door closed. (1:disable, 0:enable) 4 4 bit4: notification type, 0: using notification report. 1: using sensor binary report 5 5 bit5: disable multi cc in auto report. (1:disable, 0:enable) 6 6 bit6: disable to report battery state when the device triggered. (1:disable, 0:enable) 9 turn off light time after turn on the lighting, setting the delay time to turn off the lighting when the pir motion is not detected. 8 seconds per tick, default tick is 4 (32 seconds). 0 means never send turn off light command 0 1 0 0 4 from to description 0 127 after turn on the lighting, setting the delay time to turn off the lighting when the pir motion is not detected. 8 seconds per tick, default tick is 4 (32 seconds). 0 means never send turn off light command 2 basic set level setting the basic command value to turn on the light. the 0x ff( 1) means turn on the light. for dimmer equipment 1 to 100 means the light strength. 0 means turn off the light. caution: the value is unsigned byte, the range is from 0x00 ~ 0x ff. 0 1 0 0 127 from to description 127 127 setting the basic command value to turn on the light. the 0x ff( 1) means turn on the light. for dimmer equipment 1 to 100 means the light strength. 0 means turn off the light. caution: the value is unsigned byte, the range is from 0x00 ~ 0x ff. 4 light threshold setting the illumination threshold to turn on the light. when the event triggered and the environment illumination lower then the threshold, the device will turn on the light. 0 means turn off illumination detected function. and never turn on the light. 1 means darkest. 99 means brightest. 100 means turn off illumination detected function. and always turn on the light. notice: in none test mode, only the value in 1 to 99 will enable the illumination detected function and update the illumination value. 0 1 0 0 99 from to description 0 100 setting the illumination threshold to turn on the light. when the event triggered and the environment illumination lower then the threshold, the device will turn on the light. 0 means turn off illumination detected function. and never turn on the light. 1 means darkest. 99 means brightest. 100 means turn off illumination detected function. and always turn on the light. notice: in none test mode, only the value in 1 to 99 will enable the illumination detected function and update the illumination value. texts