- Name
- Wave 2PM
- Brand
- Shelly Qubino
- Texts
- ID Description Value 8
- Features
- Feature Values Color
- Documents
- Category File Manual_English
- Role type
- ROLE_TYPE_END_NODE_ALWAYS_ON
- User icon
- 0x0700
- Categories
- On/Off Switches/Devices
- Product id
- 0x0081
- S2 classes
- S2_AUTHENTICATED, S2_UNAUTHENTICATED
- Device type
- Binary Switch DT
- Oem version
- HW: 01 FW: 12.08:02.04
- Library type
- END_NODE_ENHANCED_232
- Product line
- Wave
- Supports nwi
- Yes
- Installer icon
- 0x0700
- Z wave version
- 7.21.1
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x0460
- Product type id
- 0x0002
- Long description
- The Device is a single product that enables remote control of two electrical devices such as bulbs, ceiling fans, and IR heaters. It switches (on/off) two independent loads (10 A per channel, 16 A total, 18 A total peak) and measures their power consumption separately and in total. The Device is compatible with switches (default) and push-buttons. If the SW (SW1) is configured as a switch, each toggle of the switch will change the output state O (O1) to the opposite state. If the SW (SW1) is configured as a push-button in the Device settings, each press of the push-button changes the output state O (O1) to opposite - ON, OFF, ON, etc. If the SW2 is configured as a switch, each toggle of the switch will change the output state O2 to the opposite state. If the SW2 is configured as a push-button in the Device settings, each press of the push-button changes the output state O2 to opposite - ON, OFF, ON, etc. Highlights and features: - 2 channels (2x 10 A, 16 A total) - Power metering on each channel and in total - Extremely low power consumption: 0.3 W. - Z-Wave frequency band: 868.4 MHz (CEPT countries) - Latest technology: Z-Wave 800 Series - Automatic set-up with SmartStart - Security 2 Authenticated for the highest level of security - Supports over-the-air firmware updates - Simple installation in most standard electrical boxes and switches - Works with Z-Wave certified gateways and over 4,000 Z-Wave devices
- Hardware platform
- ZGM230SA
- Short description
- The Device is a single product that enables the control of the on/off function for two electrical devices such as bulb, ceiling fan, IR heater. It measures the power consumption of the connected device.
- Product identifier
- QNSW-002P16EU
- Countries / regions
- Armenia, Bahrain, European Union, Cyprus, Moldova, Egypt, French Guiana, Georgia, Iraq, Jordan, Kazakhstan, Kuwait, Lebanon, Libya, Maldives, Mauritius, Nigeria, Oman, Philippines, Qatar, Saudi Arabia, South Africa, Turkmenistan, United Arab Emirates, ZU, Yemen
- Supports smart start
- Yes
- Certification number
- ZC14-24070456
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Flag Advanced Read-only 1
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC_V2
- Supported notification types
- Notification Type Event / State Heat Alarm
- Supported / controlled meter types
- Meter Type Rate Type Electric meter
- Value black communications protocol value z wave z/ip electric load type value incandescent mlv (magnetic) elv (electronic) led firmware updatable value updatable by consumer by rf loads controlled value 2 neutral wire required value 1 switch load capacity current value 8 a switch load capacity watts value 1840 switch type value toggle association groups
- Group Number Maximum Nodes Supported End Point ID Group Name Profile 1