- Name
- Z-Wave Repeater with socket iO
- Brand
- Simon
- Features
- Feature Values Switch Load Capacity Current
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0700
- Categories
- All Lighting Devices, On/Off Switches/Devices
- Product id
- 0x0019
- S2 classes
- S2_UNAUTHENTICATED
- Device type
- On/Off Power Switch
- Oem version
- HW: 1 FW: 1.02
- Library type
- SLAVE_ENHANCED_232
- Product line
- 5P
- Supports nwi
- Yes
- Installer icon
- 0x0700
- Z wave version
- 6.81.01
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x0208
- Product type id
- 0x0100
- Long description
- Smart Plug is a Z-Wave Switch plugin module specifically used to enable Z-Wave command and control (on/off) of any plug-in tool. It can report wattage consumption or kWh energy usage. This device is a security enabled Z-Wave Plus product that is able to use encrypted Z-Wave Plus messages to communicate to other security enabled Z-Wave Plus products. Smart Plug is also a security Z-Wave device and supports the Over The Air (OTA) feature for the product’s firmware upgrade. This device must be used in conjunction with a Security Enabled Z-Wave Controller in order to fully utilize all implemented functions. Features: 1) AC output switch on/off by manual or Z-Wave command; 2) RGB LED indicates the Z-WAVE network range and load power; 3) Support S0 and S2 security network; 4) Supporting power meter; 5) Supporting repeater role; 6) Supporting firmware OTA; 7) Supporting Smart Start; 8) Supports over-current protection
- Hardware platform
- ZM5202
- Short description
- Smart Plug is a Z-Wave Switch plugin module specifically used to enable Z-Wave command and control (on/off) of any plug-in tool.
- Product identifier
- 10002880-039
- Countries / regions
- European Union
- Supports smart start
- Yes
- Certification number
- ZC10-20076940
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 152
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_SCENE_ACTUATOR_CONF
- Supported / controlled meter types
- Meter Type Rate Type Description Electric meter
- Value manufacturer proprietary protocol firmware updatable value not updatable switch type value decorator paddle push supported meter type switch load capacity watts electric load type color value antique brass association groups
- Group Number Maximum Nodes Supported End Point ID Group Name Description 1
- From to description 0 0 the function is disabled. 1 100 available settings: 1 100 (0 100%) 151 threshold of power report power threshold to be interpreted, when the change value of load power exceeds the setting threshold, the smart plug will send meter report to association device (group lifeline). 0 2 0 200 50 from to description 0 200 available settings: 0 200 (0 200 w) 0 0 0 the function is disabled. 24 notification when load status change smart plug can send notifications to association device (group lifeline) when state of smart plug’s load change. 0 1 0 2 1 from to description 2 2 send basic report only when load condition is not changed by z wave command. 0 0 the function is disabled. 1 1 send basic report. 171 power report frequency the interval of sending power report to association device (group lifeline). 0 4 0 2678400 3600 from to description 0 0 the function is disabled. 3600 2678400 available settings: 3600 2678400 (3600 2678400s) 172 energy report frequency the interval of sending energy report to association device (group lifeline). 0 4 0 2678400 7200 from to description 0 0 the function is disabled. 3600 2678400 available settings: 3600 2678400 (3600 2678400s) 173 voltage report frequency the interval of sending voltage report to association device (group lifeline). 0 4 0 2678400 7200 from to description 0 0 the function is disabled. 3600 2678400 available settings: 3600 2678400 (3600 2678400s) 174 electricity report frequency the interval of sending electricity report to association device (group lifeline). 0 4 0 2678400 7200 from to description 0 0 the function is disabled. 3600 2678400 available settings: 3600 2678400 (3600 2678400s) 254 enable/disable the configuration command lock/unlock all configuration parameters. 0 1 0 1 0 from to description 0 0 unlock 1 1 lock texts
