- Name
- Smart Dry Contact Switch 7 (ZRX Version)
- Brand
- WiDom
- Texts
- ID Description Value 8
- Documents
- Category Description File Manual_English
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0700
- Categories
- All Lighting Devices, Water Valves & Irrigation, On/Off Switches/Devices, Gas Valves
- Product id
- 0x0007
- S2 classes
- S2_AUTHENTICATED, S2_UNAUTHENTICATED
- Device type
- Binary Switch DT
- Oem version
- HW: 01 FW: 07.00
- Library type
- END_NODE_ENHANCED_232
- Product line
- Z-Wave Product
- Supports nwi
- Yes
- Installer icon
- 0x0700
- Z wave version
- 7.16.3
- Frequency plans
- EU: 869.85MHz, 868.40MHz, IN: 865.20MHz
- Manufacturer id
- 0x0149
- Product type id
- 0x0004
- Long description
- Turns ON and OFF the load by using an external switch, or from remote through a controller. Works with both momentary and toggle switches. In its ZRX variant the device can also be controlled by Cherubini Remote Controls of SKIPPER - POP OR GIRO series. 16 Amp relay. The unique feature Offline Setup Mode allows to configure some parameters without using any user interface. This feature enables the professional user to setup the main features of the device in the field even if the device is not included in a Z-Wave ™ Network. When the device will be included in the network all these configuration parameters will be maintained A timer can be set when switching On and/or Off. It is also possible to define which event will start the timer. The device supports Central Scene Notification, and the events that trigger the Report can be customized with the configuration parameters. As a constantly powered node, the device will act as repeater in order to increase the reliability of the network. This device is a security enabled Z-Wave Plus ™ product The system supports over-the-air firmware updates that do not require the device to be removed from its location. The system includes an RGB LED indicator that shows the device’s status during installation Power supply: 110 - 230 VAC±10% 50/60 Hz - 24VDC Maximum Load on Relay: 16A resistive Load The extremely small size facilitates installation: 37x37x17 mm Maximum distance: Up to 100 m outdoor - Up to 40 m indoor New Z-Wave™ serie 700, SmartStart and S2 security
- Hardware platform
- ZGM130S037HGN2 / ZGM130S037HGN1
- Short description
- Smart Dry Contact Switch 7 can turn ON and OFF equipment’s with an independent power supply, such as solenoid valves (e.g. gas, water and irrigation), power operated valves etc. In its ZRX variant the device can also be controlled by Cherubini Remote Controls of SKIPPER - POP OR GIRO series.
- Association groups
- Group Number Maximum Nodes Supported End Point ID Group Name Profile 1
- Product identifier
- DRYZRX
- Countries / regions
- Algeria, Armenia, Bahrain, European Union, Cyprus, Moldova, Egypt, French Guiana, Georgia, Iraq, Jordan, Kazakhstan, Kuwait, Lebanon, Libya, Maldives, Mauritius, Nigeria, Oman, Philippines, Qatar, Saudi Arabia, South Africa, Turkmenistan, United Arab Emirates, ZU, Yemen, India
- Supports smart start
- Yes
- Certification number
- ZC14-22050106
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value 1
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC_V2