- Name
- Smart Roller Shutter 7
- Brand
- WiDom
- Texts
- ID Description Value 8
- Documents
- Category Description File Manual_English
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x1a00
- Categories
- On/Off Switches/Devices, Motor Control
- Product id
- 0x000d
- S2 classes
- S2_AUTHENTICATED, S2_UNAUTHENTICATED
- Device type
- Window Covering DT
- Oem version
- HW: 01 FW: 02.01
- Library type
- END_NODE_ENHANCED_232
- Product line
- Z-Wave 700 Product
- Supports nwi
- Yes
- Installer icon
- 0x1a00
- Z wave version
- 7.16.3
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x0149
- Product type id
- 0x0004
- Long description
- An "in wall device", for the multilevel control of roller shutter motors, completely configurable so that it can adapt to the most varied customers’ needs, while being ready for use without needing additional configurations in order to operate. After an initial calibration procedure, thanks to a proprietary algorithm, the device is able to identify the exact position of the roller shutter without using external sensors. During the operation, a continuous and automatic control of the limit switches allows maintaining the calibration. In the absence of a power source, the system runs a self-repositioning procedure that restores calibration. New Z-Wave™ serie 700, SmartStart and S2 security. The device is equipped with contact protection technology (Zero Crossing). The unique feature Offline Setup Mode allows to configure some parameters without using any user interface. This feature enables the professional user to setup the main features of the device in the field even if the device is not included in a Z-Wave™ Network. When the device will be included in the network all these configuration parameters will be maintained. As a constantly powered node, the device will act as repeater in order to increase the reliability of the network. This device is a security enabled Z-Wave Plus™ product The system supports over-the-air firmware updates that do not require the device to be removed from its location. The system includes an RGB LED indicator that shows the device’s status during installation Power supply: 110 – 230 VAC±10% 50/60 Hz Maximum load: 1200 Watt Temperature Limitation: 105°C Work Temperature: -10° to 40°C Maximum distance: Up to 100 m outdoors – up to 40 m indoor Dimensions: 37x37x17 mm Power consumption: < 230 mW in standby mode; < 500 mW when motor is moving
- Hardware platform
- ZGM130S037HGN2 / ZGM130S037HGN1
- Short description
- Smart Roller Shutter 7 is an "in wall device", for the multilevel control of roller shutter motors. It can accurately control the opening and closing of blinds, curtains, shutters, venetian blinds as requested by the user through local commands or remotely.
- Association groups
- Group Number Maximum Nodes Supported End Point ID Group Name Profile 1
- Product identifier
- UMS700
- Countries / regions
- Algeria, Armenia, Bahrain, European Union, Cyprus, Moldova, Egypt, French Guiana, Georgia, Iraq, Jordan, Kazakhstan, Kuwait, Lebanon, Libya, Maldives, Mauritius, Nigeria, Oman, Philippines, Qatar, Saudi Arabia, South Africa, Turkmenistan, United Arab Emirates, ZU, Yemen
- Supports smart start
- Yes
- Certification number
- ZC14-22100151
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value 2
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_ASSOCIATION_V2