- Name
- Wall Switch
- Brand
- Winytechnology
- Features
- Feature Values Switch Load Capacity Volt-Ampere
- Documents
- Category Description File Manual_Primary_Lang
- Categories
- All Lighting Devices, On/Off Switches/Devices
- Product id
- 0x0012
- Device type
- On/Off Power Switch
- Oem version
- 1.01
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Z wave version
- 6.51.06
- Frequency plans
- KR: 920.90MHz, 921.70MHz, 923.10MHz
- Manufacturer id
- 0x0242
- Product type id
- 0x0003
- Long description
- Z-Wave Wall Switch provides on/off control of a light by smartphone or manual. Adds local and Z-Wave On/Off control to a wired light or appliance and can replace a traditional On/Off switch.
- Hardware platform
- ZM5101
- Short description
- Z-Wave Wall Switch provides on/off control of a light by smartphone or manual.
- Product identifier
- WTR-1210-11
- Countries / regions
- Republic of Korea
- Certification number
- ZC10-16080001
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 2
- Supports explorer frames
- Yes
- Value 110 va switch load capacity current value 0.5 a @ 220 vac switch load capacity watts value 110 w neutral wire required firmware updatable value updatable by consumer by rf color value white association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 1 1 report at the press of a button 0 0 release report set at the press of a button 255 reset initialize a select configuration parameter, or reset all configuration parameters to their default values. 0 1 0 0 255 from to description 3 3 initialize parameter 3 to default 101 101 initialize parameter 101 to default 255 255 reset to the default full parameter 2 2 initialize parameter 2 to default 101 key report source select (krss) this option sets which keys will report. the option is a bit mask option, so values should be added together of multiple keys are being selected. for example, 1 + 4 = 5 turns on reporting for key 1 and key 3. 0 4 0 0 1792 from to description 4 4 key 3 report 2 2 key 2 report 1 1 key 1 report texts
- ID Description Value 1
