- Name
- Siren alarm EU
- Brand
- Zipato
- Features
- Feature Values Supported Notification Types
- Is flirs
- Yes
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_LISTENING
- User icon
- 0x0F00
- Categories
- Security Add-Ons, Security Systems
- Product id
- 0x1083
- S2 classes
- S2_UNAUTHENTICATED
- Device type
- Siren
- Oem version
- HW: 96 FW: 2.17
- Library type
- SLAVE_ROUTING
- Supports nwi
- Yes
- Installer icon
- 0x0F00
- Z wave version
- 6.81.01
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x0131
- Product type id
- 0x0003
- Long description
- Alerts you if an intruder tries to get into your home through your doors or windows. · Set the siren and warning light to turn on when unexpected activity is detected. · Set up the siren so that it’s triggered automatically by your sensors and camera. Get smart alerts when doors or windows are opened unexpectedly or when motion is detected.
- Hardware platform
- ZM5202
- Short description
- Multi sound siren which can be used with any Z-Wave gateway.
- Product identifier
- ne-nas-ab02z.eu
- Countries / regions
- European Union
- Supports smart start
- Yes
- Certification number
- ZC10-18096228
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_POWERLEVEL
- Supported notification types
- Notification Type Event / State Siren
- Value siren battery quantity value 2 battery type value cr123 a association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 1 3 low, middle, high 2 configure alarm duration time this parameter defines the alarm duration time when siren receives an alarm sensor notification report or an alarm command from controller. siren duration time has three settings: 30 seconds (parameter is set to ‘1’), 1 minute (parameter is set to ‘2’), 5 minute (parameter is set to ‘3’). the default value is ‘2’. 0 1 0 0 2 from to description 1 3 30 sec, 1 min, 5 min 6 configure doorbell music index this parameter defines the doorbell music index so siren can play different music when an alarm occurs. there are 10 different music compositions for user selection. 0 1 0 0 10 from to description 1 10 sound types 5 configure alarm sound index this parameter defines the alarm sound index so siren can play different sound when an alarm occurs. there are 10 different sounds for user selection. 0 1 0 0 9 from to description 1 10 sound types 3 configuring doorbell music duration time this parameter defines the doorbell music duration time when siren receives a door/window sensor notification report or an alarm command (basic set =0x02) from a controller. the doorbell music will be played always if this parameter is set to ‘0’. the doorbell music will not be played if this parameter is set to ‘ 1’. other values are the doorbell music playing duration time. unit: time. 0 1 0 0 1 from to description 0 127 duration 4 configure doorbell music volume this parameter defines the output volume when siren plays doorbell music. doorbell music volume has three settings: low (parameter is set to ‘1’), middle (parameter is set to ‘2’), high (parameter is set to‘3’). the default value is ‘2’. 0 1 0 0 2 from to description 1 3 low, middle, high texts
