- Name
- PIR Sensor
- Brand
- Zipato
- Features
- Feature Values Battery Type
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_REPORTING
- User icon
- 0x0C07
- Categories
- Sensors
- Product id
- 0x1089
- Device type
- Notification Sensor
- Oem version
- HW: 66 FW: 3.80
- Library type
- SLAVE_ROUTING
- Supports nwi
- Yes
- Installer icon
- 0x0C07
- Z wave version
- 6.51.06
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x0131
- Product type id
- 0x0003
- Long description
- Presence detector and illuminance meter in one device. Zipato PIR motion sensor offers elaborate security and ambient sensing options.
- Hardware platform
- ZM5202
- Short description
- Presence detector and illuminance meter in one device.
- Product identifier
- ne-nas-pd01zt.eu
- Countries / regions
- European Union
- Certification number
- ZC10-18015916
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 3
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_POWERLEVEL
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Supported multilevel sensors
- Multilevel Sensor Type Illuminance
- Supported notification types
- Notification Type Event / State Home Security
- Value cr17345 color value white sensors value luminance supported notification types value home security battery quantity value 1 association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 0 99 dim level 255 255 previous non zero dim level 4 pir detection function enabled / disabled this parameter can enable or disable the pir sensor detecting function. function: enabled / disabled pir function 0 1 0 0 255 from to description 0 0 disable 255 255 enable 5 ambient illumination lux level this parameter can set lux value which determines when the light sensor is activated. if the ambient illumination level falls bellow this value and a person moves across or within the detection area, pir sensor will send z wave on command (i.e. basic set (value = parameter 3) to an associated device and activate it. 0 2 0 0 100 from to description 0 1000 lux 6 re trigger interval setting this parameter can be used to adjust the interval of being re triggered after the pir sensor has been triggered. this parameter value must be less than paramater #2. if user sets this parameter to default by configure cc, the parameter #2 will be set to default value. 0 1 0 0 8 from to description 1 8 retrigger interval in seconds 7 light sensor polling interval this parameter can set the light sensor to measure ambient illumination level interval time. note: this value must be less than wakeup interval time! 0 2 0 0 180 from to description 60 3600 seconds 8 8 if this parameter is set to “1” and when lux level is less than the value defined by parameter #5, pir sensor will send a basic set command frame (i.e. basic set (value = parameter 3) to an associated device and activate it. if lux level is greater than the value defined by parameter #5, pir sensor will not send basic set command frame. 0 1 0 0 0 from to description 0 0 disable 1 1 enable 9 ambient illumination lux level report this parameter defines by how much lux level must change in lux to be reported to the main controller. 0 2 0 0 1 from to description 0 1000 lux texts
