Skip to main content

Loading…

Home Energy Meter Gen5 — Aeotec — Off Screen Space

Off Screen Space

Home Energy Meter Gen5

Aeotec · Energy Meter

Home Energy Meter Gen5

View all Aeotec products

Connectivity: Z-WaveCategory: Energy Meter

Z-WaveCertified

App supportiOSRecently updated· Apr 2026

Aeon Labs Home Energy Meter Gen5 is a Z-Wave device that can monitor the total amount of electricity of your home. It can report the wattage energy usage and KWH usage to a Z-Wave Controller (especially a gateway). In near real-time you’ll have a full understanding of how much electricity you use and when you use it. Products that are Z-Wave certified can be used and communicate with other Z-Wave certified devices. Also a tool that can be programmed, scheduled, controlled and communicated with from anywhere in the world.

Want to buy adds it to your wish list and follows Aeotec for updates. I own it adds it to your collection.

Compare

vs Competitor ▾

Connectivity

Z-Wave

Firmware

Current version HW: 95 FW: 1.33

Specifications

Overview

Company: Aeotec
Category: Energy Meter
Device type: Sub Energy Meter

Connectivity

Standard / protocol: Z-Wave
Connectivity: Z-Wave
Transport: Z-Wave
Spec version: 6.51.02
Z-Wave frequency: US: 916.00MHz, 908.40MHz

Certification & compliance

Certificate ID

Community tags

Be the first to tag this page — tags appear right away. Try a theme, capability, or subject (e.g. WWII, heist, slow burn, time travel, A24).

From to description 0 100 the threshold can be set from 0 to 100 percent. 3 enable/disable the function of parameter 4 and 11. this parameter is used to enable/disable the function of parameter 4 and 10. (0 == disable, 1 == enable) 0 1 0 0 1 from to description 1 1 enable the function of parameter 4 and 11. 0 0 disable the function of parameter 4 and 11. 5 induce a automatic report of channel 1. this parameter is used to induce an automatic report (channel 1) when the change of the power is more/less than the threshold in wattage. 0 2 0 0 50 from to description 0 32767 the threshold can be set from 0 to 32767 watt. 6 induce an automatic report of channel 2. this parameter is used to induce an automatic report (channel 2) when the change of the power is more/less than the threshold in wattage. 0 2 0 0 50 from to description 0 32767 the threshold can be set from 0 to 32767 watt. 10 induce an automatic report of channel 2. this parameter is used to induce an automatic report (channel 2) when the change of the current power is more/less than the threshold in percentage. 0 1 0 0 10 from to description 0 100 the threshold can be set from 0 to 100 percent. 101 to set which report need to be sent. this parameter is used to configure which reports need to be sent in report group 1. the values corresponding to the first four bits of the parameter value may be combined to create different combinations of reports that you wish to have sent. for example, instantaneous current is the value 8 and instantaneous watts is the value 2, so setting parameter 101 to a value of 10 will result in both instantaneous current and instantaneous watts to be reported. see the full description of the parameter values for other possible settings. 0 4 0 0 2 from to description 196608 196608 report instantaneous voltage of channel 2. 2048 2048 report accumulated k wh of channel 1. 1048576 1048576 report instantaneous current (amperes) of channel 2. 2 2 report instantaneous watts of whole hem. 4 4 report instantaneous voltage of whole hem. 768 768 report instantaneous watts of channel 2. 1 1 report accumulated k wh of whole hem. 524288 524288 report instantaneous current (amperes) of channel 1. 256 256 report instantaneous watts of channel 1. 4096 4096 report accumulated k wh of channel 2. 8 8 report instantaneous current (amperes) of whole hem. 65536 65536 report instantaneous voltage of channel 1. 111 set the interval time of sending report. this parameter is used to set the interval time of sending report in report group 1. (the unit of time is second). 0 4 0 0 60 from to description 0 268435456 interval seconds 112 set the interval time of sending report. this parameter is used to set the interval time of sending report in report group 2. (the unit of time is second). 0 4 0 0 120 from to description 0 268435456 interval seconds 113 set the interval time of sending report. this parameter is used to set the interval time of sending report in report group 3. (the unit of time is second). 0 4 0 0 120 from to description 0 268435456 interval seconds 200 partner id this parameter is used to configure the partner id. (0== aeon labs standard product, 1~255== others). 0 1 0 0 0 from to description 1 255 partner id of partner product 0 0 aeon labs standard product 102 to set which report need to be sent. this parameter is used to configure which reports need to be sent in report group 2. the values corresponding to the first four bits of the parameter value may be combined to create different combinations of reports that you wish to have sent. for example, instantaneous current is the value 8 and instantaneous watts is the value 2, so setting parameter 102 to a value of 10 will result in both instantaneous current and instantaneous watts to be reported. see the full description of the parameter values for other possible settings. 0 4 0 0 1 from to description 8 8 report instantaneous current (amperes) of whole hem. 2 2 report instantaneous watts of whole hem. 4 4 report instantaneous voltage of whole hem. 1048576 1048576 report instantaneous current (amperes) of channel 2. 65536 65536 report instantaneous voltage of channel 1. 1 1 report accumulated k wh of whole hem. 196608 196608 report instantaneous voltage of channel 2. 2048 2048 report accumulated k wh of channel 1. 256 256 report instantaneous watts of channel 1. 768 768 report instantaneous watts of channel 2. 4096 4096 report accumulated k wh of channel 2. 524288 524288 report instantaneous current (amperes) of channel 1. 103 to set which report need to be sent. this parameter is used to configure which reports need to be sent in report group 3. the values corresponding to the first four bits of the parameter value may be combined to create different combinations of reports that you wish to have sent. for example, instantaneous current is the value 8 and instantaneous watts is the value 2, so setting parameter 103 to a value of 10 will result in both instantaneous current and instantaneous watts to be reported. see the full description of the parameter values for other possible settings. 0 4 0 0 0 from to description 8 8 report instantaneous current (amperes) of whole hem. 1 1 report accumulated k wh of whole hem. 2048 2048 report accumulated k wh of channel 1. 524288 524288 report instantaneous current (amperes) of channel 1. 768 768 report instantaneous watts of channel 2. 4 4 report instantaneous voltage of whole hem. 4096 4096 report accumulated k wh of channel 2. 196608 196608 report instantaneous voltage of channel 2. 256 256 report instantaneous watts of channel 1. 65536 65536 report instantaneous voltage of channel 1. 1048576 1048576 report instantaneous current (amperes) of channel 2. 2 2 report instantaneous watts of whole hem. 252 enable/disable lock configuration this parameter is used to enable/disable lock all configuration parameters. (0 =disable, 1 = enable) 0 1 0 0 0 from to description 0 0 all configuration parameters are configurable. 1 1 all configuration parameters are not configurable (locked). 255 reset to default factory setting this parameter is used to reset product to default factory setting. (there are just 2 values can be used). 0 4 0 0 0 from to description 1 1 resets all configuration parameters to default setting. 1431655765 1431655765 reset the product to default factory setting and be excluded from the z wave network. 2 energy detection mode configuration. this parameter is used to configure the energy detection mode when the parameter 101~103 have been configured: 0 = report wattage and the absolute kwh value; 1 = report positive/negative wattage and the algebraic sum kwh value; 2 = report positive/negative wattage and the positive kwh value (consuming electricity); 3 = report positive/negative wattage and the negative kwh value (generating electricity). 0 1 0 0 0 from to description 2 2 report positive/negative wattage and the positive kwh value (consuming electricity); 0 0 report wattage and the absolute kwh value; 3 3 report positive/negative wattage and the negative kwh value (generating electricity). 1 1 report positive/negative wattage and the algebraic sum kwh value; 4 induce a automatic report of whole hem. this parameter is used to induce an automatic report (total wattage) when the change of the current power is more/less than the threshold in wattage. 0 2 0 0 50 from to description 0 32767 the threshold can be set from 0 to 32767 watt. 9 induce an automatic report of channel 1. this parameter is used to induce an automatic report (channel 1) when the change of the current power is more/less than the threshold in percentage. 0 1 0 0 10 from to description 0 100 the threshold can be set from 0 to 100 percent. texts