- Name
- META ENERGY DRIVEN SWITCH-C 7
- Brand
- Cherubini
- Texts
- ID Description Value 8
- Documents
- Category Description File Manual_English
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x1000
- Categories
- Energy Meters
- Product id
- 0x0009
- S2 classes
- S2_AUTHENTICATED, S2_UNAUTHENTICATED
- Device type
- Meter Sensor DT
- Oem version
- HW: 01 FW: 07.00
- Library type
- END_NODE_ENHANCED_232
- Product line
- Z-Wave Product
- Supports nwi
- Yes
- Installer icon
- 0x1000
- Z wave version
- 7.16.3
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x0149
- Product type id
- 0x0004
- Long description
- The device is a bi-directional meter capable of measuring both the consumed and produced power, equipped with a relay that can be activated to initiate specific scenarios in relation to detected power levels. It is equipped with an external current transformer and can measure powers over 10 KW. Electrical measurements: Energy produced and consumed, Instant power, Voltage RMS, Current RMS, Power Factor, SPECIAL FEATURES - Active Energy-saving management Automatically connects and disconnects a specific load if the established threshold limit is exceeded, or supplies the required power, momentarily excluding non-priority loads. - Management and prevention of electrical faults Identifies malfunctions based on irregular consumption and to the maximum time of activity. - Electrical overload management Notifies or disconnects non-priority loads in the eventuality of system overloads. - Timer Management The device has a timer that can be configured to turn ON and/or OFF the local relay. - Offline setup Mode A unique feature that allows to configure some parameters without using any user interface. - Zero Crossing Equipped with contact protection technology (Zero Crossing) which reduces the electrical stress on the relay contacts and ensures a longer life. The open / closed switching of the device always occurs when the instantaneous value of voltage is 0. META Energy Driven Switch C 7 boasts the lowest energy consumption on the market. This device is a security enabled Z-Wave Plus™ product. Power Supply: 110 - 230 VAC±10% 50/60 Hz Maximum Load on Relay: 3750 VA – 250VAC – 15 A Extremely small size: 37x37x17 mm New Z-Wave™ serie 700, SmartStart and S2 security
- Hardware platform
- ZGM130S037HGN2 / ZGM130S037HGN1
- Short description
- META Energy Driven Switch C 7 monitors all parameters, usage, faults and overloads of the electrical system. A bi-directional meter that measures consumed and produced power.
- Association groups
- Group Number Maximum Nodes Supported End Point ID Group Name Profile 1
- Product identifier
- A510086
- Countries / regions
- Algeria, Bahrain, Cyprus, Moldova
- Supports smart start
- Yes
- Certification number
- ZC14-22050103
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value 23
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_CONFIGURATION_V4
- Supported notification types
- Notification Type Event / State Power Management
- Supported / controlled meter types
- Meter Type Rate Type Electric meter