- Name
- Micromodule Energy Meter, Z-Wave
- Brand
- Zipato
- Features
- Feature Values Color
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x1700
- Categories
- Energy Meters
- Product id
- 0x001A
- Device type
- Whole Home Meter - Simple
- Oem version
- HW: 1 FW: 1.02
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x1700
- Z wave version
- 6.51.06
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x0131
- Product type id
- 0x0006
- Long description
- This product can be operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network. Zipato Energy Meter monitors total electricity consumption of connected appliances and reports it to Zipato or any other Z-Wave enabled controller in real time. Small and compact size allows easy installation in majority of electricity distribution boxes. It supports two loads upto 6000W each (@ 120V).
- Hardware platform
- SD3502
- Short description
- Zipato Energy Meter monitors total electricity consumption of connected appliances and reports it to Zipato or any other Z-Wave enabled controller in real time.
- Product identifier
- ph-pab01
- Countries / regions
- European Union
- Certification number
- ZC10-17065646
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_POWERLEVEL
- Supported / controlled meter types
- Meter Type Rate Type Description Electric meter
- Value white switch load capacity current value 60 a electric load type value incandescent firmware updatable value updatable by consumer by rf supported meter type value electric energy association groups
- Group Number Maximum Nodes Supported End Point ID Description 3
- From to description 1 32767 5*720s=3600s=1hour 3 slected end point if controller not using multi channel command class to access the endpoint of micromodule, you may configure the endpoint value to react the basic command class, binary switch command class or meter command class v3. 1. selected endpoint 1: report the meter value as ct1+ct2. defauly selected endpoint is 1. 2. selected endpoint 2: report the meter value of ct1. 3. selected endpoint 3: report the meter value of ct2. 0 1 0 0 1 from to description 3 3 3: ct2 1 1 1: ct1 and ct2 2 2 2: ct1 4 threshold of current for load caution this is a warning when the current of load over the preset threshold value, if the setting value is 750, when the load wattage of ct1 or ct2 over 7.5 a, micromodule will send current meter report command to the node of correspond group. 0 2 0 0 750 from to description 10 750 750*0.01 a=7.5 a 5 threshold of kwh for load caution this is a warning when the kwh of load over the preset threshold value, if the setting value is 10000, when the accumulated power consumption of ct1 or ct2 over this value, micromodule will send kwh meter report command to the node of correspond group, minum value is 1 kwh and default value is 10000 k wh. 0 2 0 0 10000 from to description 1 10000 10000*1 kwh = 10000 kwh 2 kwh meter report period if the setting is configured for 1hour (set value =720), the pab01 will report its accumulated power consumption (kw/h) every 1 hour to the node of correspond group. the maximum interval to report its accumulated power consumption (kw/h) is 45 hours (5s*32767/3600=45hr). 0 2 0 0 720 from to description 1 32767 5*720s=3600s=1hour texts