- Name
- 3-Phase Smart Meter
- Brand
- QUBINO
- Features
- Feature Values Firmware Updatable
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x1700
- Categories
- Energy Meters
- Product id
- 0x0054
- S2 classes
- S2_UNAUTHENTICATED, S2_AUTHENTICATED
- Device type
- Whole Home Meter - Simple
- Oem version
- HW: 1 FW: 1.00:01.00
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x1700
- Z wave version
- 6.71.03
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x0159
- Product type id
- 0x0007
- Long description
- The Qubino 3 Phase Smart Meter can be used in residential, industrial and utility applications. It measures energy directly in 2-wire networks by means of fast sampling of voltage and current signals. It calculates energy, power and power factor from the measured signals. You can control the device through the Z-Wave network. The Qubino 3 Phase Smart Meter can operate across a wide temperature range, from a chilly -15˚C to a scorching 55˚C (5˚F–131˚F). Every device also acts as a repeater in order to improve the range and stability of the Z-Wave network.
- Hardware platform
- ZM5101
- Short description
- The 3-Phase Smart Meter is a powerful Z-Wave device for measuring energy consumption in a three-phase electrical power network of up to 3 x 65A.
- Product identifier
- ZMNHXD1
- Countries / regions
- European Union
- Certification number
- ZC10-19066549
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 42
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_POWERLEVEL
- Supported / controlled meter types
- Meter Type Rate Type Description Electric meter
- Value updatable by consumer by rf switch load capacity current value 65 switch load capacity watts value 14950 ip (ingress protection) rated supported meter type value electric energy electric load type value incandescent fluorescent mlv (magnetic) elv (electronic) led dimmable led inductive (e.g. motor) dimmable fluorescent dimmable mlv (magnetic) dimmable elv (magnetic) communications protocol value z wave serial api neutral wire required switch type value dry contact color value light gray association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 0 0 reporting disabled 600 32535 600 32535 = 600 (600 seconds – 32535 seconds). reporting enabled. report is send with the time interval set by entered value. 43 other values reporting on time interval this parameter is valid only for voltage (v of ph1, ph2, ph3), current (a of ph1, ph2, ph3), total power factor, total reactive power (var) available configuration parameters (data type is 2 byte dec) • default value 600 (600 seconds 10 minutes) • 0 – reporting disabled • 600 32535 = 600 (600 seconds – 32535 seconds). reporting enabled. report is send with the time interval set by entered value. • note: device is reporting only if there was a change 0 2 0 0 600 from to description 0 0 reporting disabled 600 32535 (600 seconds – 32535 seconds). reporting enabled. report is send with the time interval set by entered value. texts
- ID Description Value 2
.jpg)
