Dome Door/Window Sensor Pro

Loading…

Dome Door/Window Sensor Pro — Dome — Off Screen Space

More specs

Name: Dome Door/Window Sensor Pro
Brand: Dome
Features: Feature Values Color
Documents: Category Description File Manual_Primary_Lang
Role type: ROLE_TYPE_SLAVE_SLEEPING_REPORTING
User icon: 0x0C06
Categories: Sensors
Product id: 0x0201
Device type: Notification Sensor
Oem version: HW: 2 FW: 1.01
Library type: SLAVE_ENHANCED_232
Supports nwi: Yes
Installer icon: 0x0C06
Z wave version: 6.61.00
Frequency plans: EU: 869.85MHz, 868.40MHz
Manufacturer id: 0x021F
Product type id: 0x0003
Long description: The Dome Door/Window Sensor Pro is a battery powered security-enabled* Z-Wave Plus magnetic reed switch that can monitor the status of doors, windows, and anything else that opens and closes. It can also report ambient temperature levels. The Door/Window Sensor consists of two parts - the “sensor,” and the “magnet.” The sensor has a “reed switch” inside, which is sensitive to the magnet’s presence when aligned properly and within the defined distance. When the sensor and magnet are brought together or pulled apart, the sensor will report its open/close status to its Z-Wave controller, and the encrypted wireless communication* ensures that user data remains secure. Because many manufacturers use Z-Wave to communicate, the Door/Window Sensor can interact with different products of different categories. • Z-Wave Plus Certified • S0 Security-Enabled* • Built-In Temperature Sensor • Up to 250’ range • Ten-Year Battery Life • LED Signal Strength Indication • 1.25” Max distance between sensor & magnet • Ultra-Narrow (1/4”) Magnet for Placement Between Door and Casing • Monitor doors, windows, medicine cabinets, drawers, garage doors, and many other openings
Hardware platform: ZM5101
Short description: Dome Security Enabled, Encrypted Door/Window Sensor with Built-In Temperature Detection
Product identifier: DMDP1
Countries / regions: European Union
Certification number: ZC10-18076175
Radio range z wave (m): 40
Configuration parameters: Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 5
Supports explorer frames: Yes
Supported command classes: Identifier Name Key Version COMMAND_CLASS_POWERLEVEL
Supported multilevel sensors: Multilevel Sensor Type Air temperature
Supported notification types: Notification Type Event / State Access Control
Value white battery quantity value 1 battery type value 3.7 v 14505 firmware updatable value updatable by consumer by rf sensors value air temperature open/closed (binary) supported notification types value access control home security association groups: Group Number Maximum Nodes Supported End Point ID Description 2

From to description 125 1 125 to 1 degrees offset 0 125 0 125 degrees offset 6 temperature units the door/window sensor pro can report temperature values in either celsius or fahrenheit, and this parameter allows the user to decide which unit is used. 0 1 0 0 0 from to description 0 0 temperature is reported in fahrenheit 1 1 emperature is reported in celsius 7 group 2 basic set value this parameter sets the value sent by the basic set command to association group 2. the door/window sensor pro sends a basic set command to association group 2 both when the tamper switch opens and closes (for more information, see “group 2”. value is in hexadecimal. 0x ff 0 1 0 0 255 from to description 1 99 set device to value 255 255 turn on device 0 0 turn off device 8 basic set level (group 4 opening) this parameter sets the value sent by the basic set command to association group 4. the door/window sensor pro sends a basic set command to association group 4 when the door or window opens (for more information, see “group 4” on page 14.) value is in hexadecimal. 0x ff 0 1 0 0 255 from to description 0 0 turn off device 1 99 set device to value 255 255 turn on device 9 basic set level (group 4 closing) this parameter sets the value sent by the basic set command to association group 4. the door/window sensor pro sends a basic set command to association group 4 when the door or window closes (for more information, see “group 4” on page 14.) value is in hexadecimal. 0x ff 0 1 0 0 0 from to description 0 0 turn off device 1 99 set device to value 255 255 turn on device 4 enable/disable temperature sensor the door/window sensor pro can also monitor and report ambient temperature conditions. however, temperature sensing functionality is disabled by default to save battery life, and this configuration parameter is used to enable or disable this feature. to apply this setting, the battery needs be removed and replaced! this is because the supported command classes will change according to this setting, so the device must restart to advertise its new command classes. 0 1 0 0 0 from to description 0 0 temperature sensor disabled 1 1 temperature sensor enabled 2 configure open/close reports sent this parameter switches the notification or binary sensor report sent when the door opens or closes. if this parameter is set to 01, the door/window sensor pro will report “closed” instead of “open”when the magnet and sensor are pulled apart. 0 1 0 0 0 from to description 0 0 reports closed when magnet is close 1 1 reports open when magnet is close 1 enable/disable led indicator this parameter enables or disables the led indicator flashing to indicate opening and closing events. the door/window sensor pro will always flash the led indicator for inclusion, exclusion, tamper, and other system events. 0 1 0 0 1 from to description 1 1 open/close led indicator enabled 0 0 open/close led indicator disabled 3 switch between notification and binary sensor command classes by default, the door/window sensor pro uses the notification command class to communicate open/close and tamper events. if this parameter is set to 1, the device will instead use the binary sensor command class. to apply this setting, the battery needs be removed and replaced! this is because the supported command classes will change according to this setting, so the device must restart to advertise its new command classes. 0 1 0 0 0 from to description 1 1 notification command class is used 2 2 binary sensor command class is used 0 0 both command classes are used texts

Connectivity

Firmware

Specifications

Overview

Connectivity

Certification & compliance

Community tags

Community

Edit history

Firmware & software

Identity & commercial

Lifecycle

More specs

Similar Sensor

More from Dome