Dome Z-Wave Plus Motion Detector

Loading…

Dome Z-Wave Plus Motion Detector — Dome — Off Screen Space

More specs

Name: Dome Z-Wave Plus Motion Detector
Brand: Dome
Features: Feature Values Color
Documents: Category Description File Manual_Primary_Lang
Role type: ROLE_TYPE_SLAVE_SLEEPING_REPORTING
User icon: 0x0C07
Categories: Sensors
Product id: 0x0083
Device type: Notification Sensor
Oem version: HW: 66 FW: 3.80
Library type: SLAVE_ROUTING
Supports nwi: Yes
Installer icon: 0x0C07
Z wave version: 6.51.06
Frequency plans: US: 916.00MHz, 908.40MHz
Manufacturer id: 0x027A
Product type id: 0x0003
Long description: The Dome™ Home Automation DMMS1 Z-Wave Certified Motion Detector tracks motion in your home, helping you keep your family safe. When motion is detected, your Z-Wave hub will send an alert to your smartphone, set off an alarm or trigger a lighting scene. This detector can also measure light levels to ensure the lights are operated only when required. Convenient magnetic mount offers the ultimate flexibility for multi surface adaptable installation on either wall, ceiling or table top. The device comes with a CR123A battery and has a 3-year battery life, so you can always be confident that your detector has power. Extra-long Z-Wave wireless range (up to 150 ft) allows you to place it where it’s needed without worrying if the signal reaching your Z-Wave Hub. The Dome™ Home Automation DMMS1 Z-Wave Certified Motion Detector comes with a 1-year limited warranty. Measurements in inches: 2.5 x 3.5 x 6. This sensor requires a Dome™ Home Automation Hub or other Z-Wave Certified hub for operation. The Dome™ Home Automation system gives your family the ease and security you can count on. With Dome™, you’re always connected and always covered. ● Detects movement inside your home with extra wide 110 deg. coverage and responds to activity by sending an alert to your smarthome system. Adjustable sensitivity for optimum performance based on environment ● Capable of sensing current light conditions in the room helping create smart lighting scenes. Adjustable timeout for selecting delay when lights will turn off after motion is no longer detected ● Convenient magnetic mount offering ultimate installation flexibility ● Z-Wave Plus Certified. Requires a Z-Wave Certified Hub to operate. Up to 150-foot range and 3-year battery life (CR123A Battery Included) ● Works with SmartThings, Vera, Staples Connect, HomeSeer, Nexia, Piper, URC, Harmony. Not supported: Wink, DSC, ADT Pulse, 2gig, Napco, Interlogix, Honeywell (Dome is not associated with listed brands)
Hardware platform: ZM5202
Short description: Dome™ Z-Wave Plus Motion Detector w/Light Sensor & Flexible Magnetic Mount
Product identifier: DMMS1
Countries / regions: United States of America
Certification number: ZC10-16095214
Configuration parameters: Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 3
Supports explorer frames: Yes
Supported multilevel sensors: Multilevel Sensor Type General purpose
Value white sensors value motion/no motion (binary) luminance battery quantity value 1 battery type value cr123 a association groups: Group Number Maximum Nodes Supported End Point ID Description 1
From to description 0 0 turn off 1 99 dim level 255 255 on 4 enable/disable motion detection this setting enables or disables motion detection. 0 1 0 0 1 from to description 0 0 motion detection disabled 1 1 motion detection enabled 5 group 2 ambient light threshold if parameter 8 is enabled, this setting sets the light level below which the motion detector will send basic set commands to association group 2 when motion is detected. for more information, see “group 2” on page 14. 0 2 0 0 100 from to description 5 1000 in lux 6 retrigger interval after each motion event, the motion detector is disabled for the amount of time set by this parameter before it can send out another “motion detected” notification report/binary sensor report. this value must be lower than the value of parameter 2, and if this parameter is reset to default settings, parameter 2 will also be reset. 0 1 0 0 8 from to description 1 8 in seconds 7 light sensing interval this parameter sets the amount of time between each successive ambient light level reading that is sent. this value must be less than the wakeup interval time (which is 43,200 seconds or 12 hours by default.) 0 2 0 0 180 from to description 60 3600 in seconds 8 enable/disable group 2 ambient light threshold if this parameter is enabled, the motion detector will only send basic set commands to associon group 2 if the ambient light level is below the value set in parameter 05. for more information, see “group 2” on page 14. 0 1 0 0 0 from to description 0 0 group 2 ambient light threshold disabled 1 1 group 2 ambient light threshold enabled 9 ambient light sensitivity level this parameter sets the minimum change in ambient light level (in lux) the motion detector must detect before a multilevel sensor report is sent to the main controller. 0 1 0 0 100 from to description 0 255 in lux 10 enable/disable led indicator if this parameter is enabled, the led indicator will flash everytime there motion is detected. if this is disabled, the led indicator will not flash to indicate motion events. 0 1 0 0 1 from to description 0 0 led disabled 1 1 led enabled texts

Connectivity

Firmware

Specifications

Overview

Connectivity

Certification & compliance

Community tags

Community

Edit history

Firmware & software

Identity & commercial

Lifecycle

More specs

Similar Sensor

More from Dome