- Name
- Dome Z-Wave Plus Leak Sensor
- Brand
- Dome
- Features
- Feature Values Battery Quantity
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_REPORTING
- User icon
- 0x0C05
- Categories
- Sensors
- Product id
- 0x0085
- Device type
- Notification Sensor
- Oem version
- HW: 48 FW: 2.40
- Library type
- SLAVE_ROUTING
- Supports nwi
- Yes
- Installer icon
- 0x0C05
- Z wave version
- 6.51.06
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x021F
- Product type id
- 0x0003
- Long description
- The Dome™ Home Automation DMWS1 Leak Sensor is purpose built to withstand a wet environment it may find itself in. It is suitable for areas where leaks are likely to occur: sinks, toilets, washing machines and water heaters. The Leak Sensor’s flat design allows it to be easily slid under common household appliances with low clearance from the floor. Additional flexibility is provided with a Remote Sensor extending 4 feet for placing it in hard to reach areas and sump pump pits. Once the leak is detected, the Leak Sensor will alert you by beeping locally and it will send an instant notification to your smarthome system. With a Z-Wave Certified Hub, this sensor can be set up to trigger sirens, lights and custom automation scenes or even turn off the water when used with Dome™ Water Main Shut Off (DMWV1). Extra-long Z-Wave wireless range (up to 150 ft) allows you to place it where it’s needed without worrying if the signal is reaching your Z-Wave Hub. There is a 3-year battery life, so you can always be confident that your sensor has power. Dome™ DMWS1 Leak Sensor comes with a 1-year limited warranty. Measurements in inches: 2.625 x 2.625 x 1.125. Dome™ Home Automation Z-Wave devices give your family peace of mind and security you can count on. With Dome™, you’re always connected and always covered. • Water resistant design with ultra low profile to fit under appliances. Includes a 4 feet long Remote Probe for hard to reach areas and sump pump pits • Local alarm sound with LED visual indicator when leaks are detected. Can be integrated with sirens, lights and compatible water main shut off valves (like Dome™ DMWV1) • Up to 150-foot range and 3-year battery life (CR14250 Battery Included) • Z-Wave Plus Certified. Requires a Z-Wave Certified Hub to operate • Tested to work with SmartThings, Vera, Staples Connect, HomeSeer, Nexia, Piper, URC, Harmony. Not supported by Wink, DSC, ADT Pulse, 2Gig, Napco, Interlogix, Honeywell (Dome™ is not associated with listed brands)
- Hardware platform
- ZM5202
- Short description
- Dome Z-Wave Plus Miniature Leak Sensor with Remote Probe and Water Resistant Housing
- Product identifier
- DMWS1
- Countries / regions
- United States of America
- Certification number
- ZC10-16095212
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 2
- Supports explorer frames
- Yes
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Supported multilevel sensors
- Multilevel Sensor Type Water flow
- Value 1 battery type value cr14250 color value white ip (ingress protection) rated sensors value water flow association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 1 255 in minutes 6 enable/disable water detection this parameter enables or disables the leak sensor if disabled, the device will not respond in any way to detected leaks. 0 1 0 0 1 from to description 0 0 water detection disabled 1 1 water detection enabled 7 basic set level this parameter defines the value sent by the basic set command to association group 2 (for more information, see “assocation groups”.) 0 1 0 0 255 from to description 0 0 turn off device 1 99 dim level 255 255 turn on device 1 total alarm duration this parameter sets the total amount of time the leak sensor will beep and light its led in the event of a leak (see figure 5.) 0 1 0 0 120 from to description 0 0 leak sensor beeps until water is removed 1 255 in minutes 3 initial alarm this parameter sets the amount of time the leak sensor beeps before it is muted (see fig 5.) 0 1 0 0 60 from to description 10 255 in seconds 4 reminder alarm this parameter sets the length of each beep after the initial alarm (see fig 5.) 0 1 0 0 5 from to description 5 255 in seconds 5 enable/disable audible alarm this parameter enables or disables the audible alarm (“beeping”) functionality of the leak sensor. 0 1 0 0 1 from to description 0 0 disable audible alarm 1 1 enable audible alarm texts
- ID Description Value 1