- Name
- Heatit Z-Dim
- Brand
- Heatit controls
- Features
- Feature Values Color
- Documents
- Category Description File Image_Product_Supplemental_3
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0600
- Categories
- All Lighting Devices, Dimming Lighting Devices
- Product id
- 0x2200
- S2 classes
- S2_UNAUTHENTICATED, S2_AUTHENTICATED
- Device type
- Light Dimmer Switch
- Oem version
- HW: 1 FW: 1.00
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0600
- Z wave version
- 6.71.03
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x019B
- Product type id
- 0x0003
- Long description
- Heatit Z-Dim is a Z-Wave rotary dimmer for many different types of light sources. The Heatit Z-Dim works on low loads without causing the lights to flicker. It dims LED-bulbs from 1-200VA, 230V halogen and incandescent bulbs, dimable LED-drivers and electronic transformers. The dimmer is not affected by startup inrush currents. L+N leads must be connected. The dimmer is equipped with a multiway switching option. This allows you to light and dim a light source from one dimmer, and later turn it off with another one. Very practical for stairwells, long hallways etc. The dimmer fits into standard Gira System 55 frame systems.
- Hardware platform
- ZM5101
- Short description
- Heatit Z-Dim is a Z-Wave rotary dimmer for many different types of light sources. Heatit Z-Dim can dim to a lower level than traditional dimmers, only 1VA. This dimmer makes you able to set the mood in any room of your choosing. It also functions as a scene controller, which enables you to use the dimmer for a large number of tasks.
- Product identifier
- Z-Dim
- Countries / regions
- European Union
- Certification number
- ZC10-19106778
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_SWITCH_BINARY
- Supported / controlled meter types
- Meter Type Rate Type Description Electric meter
- Value white electric load type value incandescent dimmable led dimmable elv (magnetic) firmware updatable value updatable by consumer by rf neutral wire required switch type value rotary knob z wave scene type value central scene supported meter type value electric energy switch load capacity volt ampere value 200 switch load capacity current value 0,9 switch load capacity watts value 200 association groups
- Group Number Maximum Nodes Supported End Point ID Group Name Profile Description 1
- From to description 0 0 not configured (default) 1 200 1 200 watts connected load 6 scene controller. the parameter enables scene controller. 1 1 0 1 1 from to description 1 1 active (default) 0 0 disabled 7 switch on level. the parameter defines the dimming level when restored from the off state by push button. 1 1 0 99 0 from to description 1 99 1% 99% 0 0 restores last dim level (default) 10 power restore level. the parameter defines initial dimming level after power loss. 1 1 1 99 50 from to description 1 99 1% 99% default is 50 (50%) 3 maximum dim level. the parameter defines the highest dimming level of the dimmer. the value must be higher than parameter 2 ”minimum dim level”. 1 1 2 99 85 from to description 2 99 2% 99% default is 85 (85%) 5 double press function. the parameter defines the double press functionality. 1 1 0 1 0 from to description 1 1 dim to highest level 0 0 central scene notification (default) 8 dimming duration. the parameter defines how long it takes to dim to the desired level. note! only multilevel switch command class is affected by this parameter. 1 1 0 255 1 from to description 0 0 disabled 1 127 duration in seconds (1 127 seconds. default is 1) 128 255 duration in minutes (1 127 minutes) texts
- ID Description Value 5
.jpg)
