- Name
- Heatit ZM Single Relay 16A
- Brand
- Heatit controls
- Features
- Feature Values Firmware Updatable
- Documents
- Category File Description Image_Product_Supplemental_3
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0700
- Categories
- All Lighting Devices, On/Off Switches/Devices
- Product id
- 0x3500
- S2 classes
- S2_UNAUTHENTICATED, S2_AUTHENTICATED
- Device type
- Binary Switch
- Oem version
- HW: 1 FW: 1.00
- Library type
- SLAVE_ENHANCED_232
- Product line
- Energy
- Supports nwi
- Yes
- Installer icon
- 0x0700
- Z wave version
- 7.13.7
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x019B
- Product type id
- 0x0004
- Long description
- Heatit ZM Single Relay is a high power relay for in-wall installations. The relay allows you to control connected devices either through your Z-Wave network or via a wired switch. The module is equipped with a 16A relay and has a scene controller functionality. The device can withstand a load of max 16A /3600W at 230VAC. The Heatit ZM Single Relay has a power metering feature that allows you to monitor the power consumption of your connected devices.
- Hardware platform
- ZGM130
- Short description
- Heatit ZM Single Relay is a high power relay for in-wall installations.
- Product identifier
- ZM Single Relay 16A
- Countries / regions
- European Union
- Supports smart start
- Yes
- Certification number
- ZC12-21010159
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 4
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_CONFIGURATION_V4
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC_V2
- Supported notification types
- Notification Type Event / State Heat Alarm
- Supported / controlled meter types
- Meter Type Rate Type Description Electric meter
- Value updatable by consumer by rf neutral wire required switch load capacity volt ampere value 4000 switch load capacity watts value 3600 switch type value push button z wave scene type value central scene electric load type value incandescent fluorescent mlv (magnetic) elv (electronic) led association groups
- Group Number Maximum Nodes Supported End Point ID Group Name Profile Description 1
- From to description 0 0 button turns load on/off and sends meter report + relay status. 1 1 button sends meter report + relay status, load can be only controlled wirelessly 11 meter report delta value meter report delta value 2 2 5 3600 75 from to description 5 3600 5 3600 w. 5 scene notifications decides if/what scene controller notifications the device sends to gateway. 2 1 0 3 0 from to description 0 0 sends scene controller for s2. s1 disabled 1 1 sends scene controller for s1. s2 disabled 2 2 sends scene controller for s1 and s2 3 3 scene controller deactivated. 3 switch type decides what type of switch is connected. 2 1 0 1 0 from to description 0 0 momentary switch 1 1 toggle switch 9 inverted output decides if the relay output should be inverted 2 1 0 1 0 from to description 0 0 standard operation 1 1 inverted output 6 restore power level relay power level after power is restored from power outage. when device is from factory/factory reset the first state of the device should be off 2 1 0 2 2 from to description 0 0 always off on restored power 1 1 always on on restored power 2 2 restore last state on restored power (default) 8 automatic turn on time to turn relay on after having been turned off 2 4 0 86400 0 from to description 0 0 auto on disabled. 1 86400 auto on timeout in seconds 7 automatic turn off time to turn relay off after having been turned on 2 4 0 86400 0 from to description 0 0 auto off disabled. 1 86400 auto off timeout in seconds texts
- ID Description Value 8
.jpg)
