- Name
- In-Wall On/Off Switch Module-2 Channels
- Brand
- Nexa
- Features
- Feature Values Electric Load Type
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0702
- Categories
- All Lighting Devices, On/Off Switches/Devices, Lighting Accessories
- Product id
- 0x000E
- S2 classes
- S2_UNAUTHENTICATED, S2_AUTHENTICATED
- Device type
- On/Off Power Switch
- Oem version
- HW: 1 FW: 1.01:00.01
- Library type
- SLAVE_ENHANCED_232
- Product line
- Z-Wave Plus 500 series
- Supports nwi
- Yes
- Installer icon
- 0x0700
- Z wave version
- 6.81.03
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x0060
- Product type id
- 0x0004
- Long description
- The dual relay in-wall module contains two sets of relays and switches, with each set dedicated for controlling lighting or an appliance in your home. The module is a Z-WaveTM enabled device which is fully compatible with any Z-WaveTM enabled network. This product can be operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers. All mains operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network. Each relay can be turned on/off individually using Z-WaveTM commands or using the switches connected to the module. At 230V voltage, this module can support up to 2*4.3A output, 2*1000W resistive load. This unit is to be installed and sealed inside an electrical switch box.
- Hardware platform
- SD3502
- Short description
- The dual relay in-wall module contains two sets of relays and switches, with each set dedicated for controlling lighting or an appliance in your home.
- Product identifier
- AN-196
- Countries / regions
- European Union
- Supports smart start
- Yes
- Certification number
- ZC10-22067097
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_POWERLEVEL
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Supported notification types
- Notification Type Event / State Power Management
- Value incandescent fluorescent led firmware updatable value updatable by consumer by rf association groups
- Group Number Maximum Nodes Supported End Point ID Group Name Description 3
- From to description 0 1 0: momentary 1: toggle 2 parameter 2 switch 2 type 1 1 0 1 0 from to description 0 1 0: momentary 1: toggle 3 parameter 3 relay 1 auto off time 1 1 0 127 0 from to description 0 127 0: not auto off 4 parameter 4 relay 2 auto off time 1 1 0 127 0 from to description 0 127 0: not auto off 5 parameter 5 set whether to remember the last status of relay 1 1 1 0 1 1 from to description 0 1 1: remember 0: do not remember 6 parameter 6 set whether to remember the last status of relay 2 1 1 0 1 1 from to description 0 1 1: remember 0: do not remember texts
- ID Description Value 8
