- Name
- Bulb
- Brand
- Oomi
- Features
- Feature Values Firmware Updatable
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0600
- Categories
- All Lighting Devices, Dimming Lighting Devices
- Product id
- 0x0062
- Device type
- Light Dimmer Switch
- Oem version
- HW: 98 FW: 1.07
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0600
- Z wave version
- 6.51.09
- Frequency plans
- CN: 868.40MHz
- Manufacturer id
- 0x016A
- Product type id
- 0x1D03
- Long description
- Oomi Bulb is a low-cost Z-Wave LED module which allows control (on/off/dim) with the use of Z-Wave. It’s a bulb has a Smart RGB LED, which can be used to add colour to your home. The bulb has 5 main colour channels available for you to adjust: Red, Green, Blue, Warm White and Cold White. You can configure its colour according to your favour. The LED Bulb is also a security Z-Wave device and supports the Over The Air (OTA) feature for the product’s firmware upgrade.
- Hardware platform
- ZM5101
- Short description
- Oomi Bulb is a low-cost Z-Wave LED module which allows control (on/off/dim) with the use of Z-Wave.
- Product identifier
- FT098-K55
- Countries / regions
- China
- Certification number
- ZC10-17095780
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 80
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_SCENE_ACTUATOR_CONF
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Value updatable by consumer by rf switch type value toggle z wave scene type value scene association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 0 0 nothing 1 1 hail cc 2 2 basic cc report. 112 set the dimmer mode. set the dimmer mode. 0 1 0 0 0 from to description 0 0 parabolic curve mode 1 1 index curve mode 2 2 (parabolic + index)/2 mode 3 3 linear mode 252 enable/disable lock configuration enable/disable to lock configuration parameters. 0 1 0 0 0 from to description 0 0 disable 1 1 enable 255 reset the bulb reset the bulb to factory default. 0 4 0 0 0 from to description 0 0 reset all configuration parameters to factory default settings 1431655765 1431655765 reset the bulb to factory default. texts
- ID Description Value 1
