- Name
- Color Strip
- Brand
- Oomi
- Features
- Feature Values Firmware Updatable
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0600
- Categories
- All Lighting Devices, Dimming Lighting Devices
- Product id
- 0x0079
- Device type
- Light Dimmer Switch
- Oem version
- HW: 121 FW: 1.01
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0600
- Z wave version
- 6.51.09
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x016A
- Product type id
- 0x0103
- Long description
- Oomi Color Strip is a multi-coloured LED Strip which allows control (on/off/dim/colour change) via wireless Z-Wave commands. The Color Strip can also communicate securely via AES 128 wireless Z-Wave commands and supports Over-The-Air (OTA) firmware upgrades.
- Hardware platform
- ZM5101
- Short description
- Oomi Color Strip is a low-cost Z-Wave LED Strip module which allows control (on/off/dim) with the use of Z-Wave.
- Product identifier
- FT121-A
- Countries / regions
- United States of America
- Certification number
- ZC10-17045551
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 252
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_SCENE_ACTUATOR_CONF
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Value updatable by consumer by rf switch type value push button illuminated z wave scene type value scene association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 0 0 disable 1 1 enable 255 reset the color strip reset the color strip to factory default. 0 4 0 0 0 from to description 0 0 reset all configuration parameters to factory default settings 1431655765 1431655765 reset the color strip to factory default. 80 to set whcih notification can be sent to the associated devices (group 1) when the state of led bulb is changed. to set whcih notification can be sent to the associated devices (group 1) when the state of led strip is changed. 0 1 0 0 1 from to description 3 3 haill cc when pressing the action button to change its state 0 0 nothing 1 1 hail cc 2 2 basic cc report. 112 set the dimmer mode. set the dimmer mode. 0 1 0 0 0 from to description 0 0 parabolic curve mode 1 1 index curve mode 2 2 (parabolic + index)/2 mode 3 3 linear mode texts
- ID Description Value 2
