- Name
- Wave 1
- Brand
- Shelly Qubino
- Texts
- ID Description Value 8
- Features
- Feature Values Color
- Documents
- Category File Manual_English
- Role type
- ROLE_TYPE_END_NODE_ALWAYS_ON
- User icon
- 0x0700
- Categories
- On/Off Switches/Devices
- Product id
- 0x0083
- S2 classes
- S2_AUTHENTICATED, S2_UNAUTHENTICATED
- Device type
- Binary Switch DT
- Oem version
- HW: 01 FW: 11.01:02.02
- Library type
- END_NODE_ENHANCED_232
- Product line
- Wave
- Supports nwi
- Yes
- Installer icon
- 0x0700
- Z wave version
- 7.19.1
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x0460
- Product type id
- 0x0002
- Long description
- The Wave 1 is Z-Wave™ smart switch with potential-free contact. It controls on/off function for one electrical device, e.g., bulb, ceiling fan, IR heater, electrical locks, garage doors, irrigation system, etc. The output contact is potential-free (dry contact), so different power supply loads (up to 16 A) can be connected to the Device. It is compatible with push-buttons and switches (default). If the SW (SW1) is configured as a switch (default), each toggle of the switch will change the output O (O1) state to the opposite state - on, off, on, etc. If the SW (SW1) is configured as a push-button in the Device settings, each press of the push-button will change the output O (O1) state to the opposite state - on, off, on, etc. Highlights & Features: - 16 A - Dry contact - Turn ON/OFF devices - Set schedules to turn ON/OFF devices automatically - Low power consumption: 0.3 W. - Z-Wave frequency band: 868.4 MHz (CEPT countries) - Latest technology: Z-Wave 800 Series - Automatic set-up with SmartStart - Security 2 Authenticated for the highest level of security - Supports over-the-air (OTA) firmware updates - Z-Wave Repeater - Simple installation in most standard electrical boxes and switches - Works with Z-Wave certified gateways and over 4,000 Z-Wave devices
- Hardware platform
- EFR32ZG23A
- Short description
- Wave 1 controls the on/off function for one electrical device, e.g., bulb, ceiling fan, IR heater, electrical locks, garage doors, irrigation system, etc. The output contact is potential-free (dry contact).
- Product identifier
- QNSW-001X16EU
- Countries / regions
- Armenia, Bahrain, European Union, Cyprus, Moldova, Egypt, French Guiana, Georgia, Iraq, Jordan, Kazakhstan, Kuwait, Lebanon, Libya, Maldives, Mauritius, Nigeria, Oman, Philippines, Qatar, Saudi Arabia, South Africa, Turkmenistan, United Arab Emirates, ZU, Yemen
- Supports smart start
- Yes
- Certification number
- ZC14-23090326
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Flag Advanced Read-only 1
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC_V2
- Supported notification types
- Notification Type Event / State Heat Alarm
- Value blue electric load type value incandescent fluorescent mlv (magnetic) elv (electronic) led inductive (e.g. motor) firmware updatable value updatable by consumer by rf neutral wire required value 1 switch load capacity current value 16 a switch type value toggle association groups
- Group Number Maximum Nodes Supported End Point ID Group Name Profile 3