- Name
- Switch IO
- Brand
- Simon
- Features
- Feature Values Firmware Updatable
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0700
- Categories
- All Lighting Devices, On/Off Switches/Devices
- Product id
- 0x0000
- Device type
- On/Off Power Switch
- Oem version
- HW: 1 FW: 4.18.72.15.65.15
- Library type
- SLAVE_ENHANCED
- Supports nwi
- Yes
- Installer icon
- 0x0700
- Z wave version
- 6.51.07
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x0x26
- Product type id
- 0x0001
- Long description
- Simon Electronic Switch IO integrated by Electronic Switch that provides power Switch and Rocker that provides Z-Wave communication attributes.
- Hardware platform
- ZM5202
- Short description
- Simon Electronic Switch
- Product identifier
- 10002034-13x && 10000322-039
- Countries / regions
- European Union
- Certification number
- ZC10-16115315
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Value updatable by consumer by rf switch load capacity current value 10 neutral wire required switch type value push button with indicator association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 255 255 turns the main led on 0 0 turns the main led off 10 delay on delay from activation request until load activation. please note that possible values are referenced in hex format from 0x00 to 0x ff (unsigned 1 byte values). please refer to "z wave command class specification, a m" > "multilevel switch set command" > "duration table" specification to lean more about these values meaning. 0 1 0 0 0 from to description 128 254 delay in minutes from 1 to 127 0 127 delay in seconds 11 activation time time that load performs activated after complete an activation process. please note that possible values are referenced in hex format from 0x00 to 0x ff (unsigned 1 byte values). please refer to "z wave command class specification, a m" > "multilevel switch set command" > "duration table" specification to lean more about these values meaning. 0 1 0 0 0 from to description 0 127 delay in seconds 128 254 delay in minutes from 1 to 127 texts
- ID Description Value 2