- Name
- ABUS Z-Wave Wireless-Socket
- Brand
- ABUS
- Features
- Feature Values Supported Meter Type
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0701
- Categories
- All Lighting Devices, On/Off Switches/Devices
- Product id
- 0x0003
- S2 classes
- S2_UNAUTHENTICATED
- Device type
- On/Off Power Switch
- Oem version
- HW: 1 FW: 2.12
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0701
- Z wave version
- 6.71.01
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x0403
- Product type id
- 0x0003
- Long description
- the ABUS Z-Wave Wireless Socket is a compact plug adapter for switching connected devices and power metering. It includes a repeater function for extending the range of the Z-Wave radio signal. The Socket can be triggered remotely via the contected Gateway or by a button on the device.
- Hardware platform
- ZM5101
- Short description
- The ABUS Z-Wave Wireless Socket is a compact plug adapter for switching connected devices and power metering.
- Product identifier
- SHHA10000
- Countries / regions
- European Union
- Certification number
- ZC10-18116297
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Format Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4
- Supported / controlled meter types
- Meter Type Rate Type Description Electric meter
- Value electric energy switch type value push button firmware updatable value updatable by consumer by rf z wave scene type value scene switch load capacity watts value 2300 association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 0 0 function is disabled 1 0 function is enabled (default) 3 notification when load status changes 0 1 0 0 1 from to description 0 0 function is disabled 1 0 send basic report (default) 2 0 send basic report only when load status is not changed by z wave command 4 led load indicator mode selection 0 1 0 0 0 from to description 0 0 the led status follows the load change (default) 1 0 when operating the load, the led lights for 5 seconds and then turns off. 17 the value here represents minimum change in wattage percent (in terms of percentage) for a meter report (watt) to be sent 0 2 0 0 0 from to description 0 0 function is disabled 128 127 available settings (default) 100 setting the parameters 101~104 to the default value. 0 1 0 0 0 from to description 0 0 function is disabled 85 0 setting the parameters 101~104 to the default value. 101 setting time for sending meter report (watt) 0 4 0 0 0 from to description 0 0 function is disabled 5 2678400 available settings (default) 102 setting time for sending meter report (kwh) 0 4 0 0 0 from to description 0 0 function is disabled 5 2678400 available settings (default) 103 setting time for sending meter report (voltage) 0 4 0 0 0 from to description 0 0 function is disabled 5 2678400 available settings (default) 104 setting time for sending meter report (current) 0 4 0 0 0 from to description 0 0 function is disabled 5 2678400 available settings (default) 254 enable/disable the configuration command 0 1 0 0 0 from to description 0 0 unlock (default) 1 0 lock 2 setting device status after power failure 0 1 0 0 0 from to description 2 0 connected device will be off after the power supply is reconnected. 0 0 smart plug memorizes its state after a power failure. (default) 1 0 connected device will be on after the power supply is reconnected. texts
