- Name
- Radio Switch Dimmer
- Brand
- myTEM SmartHome
- Features
- Feature Values Firmware Updatable
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0702
- Categories
- All Lighting Devices, Dimming Lighting Devices, On/Off Switches/Devices, Lighting Accessories
- Product id
- 0x0009
- S2 classes
- S2_UNAUTHENTICATED, S2_AUTHENTICATED
- Device type
- Light Dimmer Switch
- Oem version
- HW: 1 FW: 1.00
- Library type
- SLAVE_ENHANCED_232
- Product line
- myTEM SmartHome
- Supports nwi
- Yes
- Installer icon
- 0x0702
- Z wave version
- 6.81.06
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x034E
- Product type id
- 0x0001
- Long description
- The myTEM Radio Switch Dimmer is a universal, Z-Wave compatible wall or ceiling dimming switch and is used for dimming lighting devices. The dimming can be achieved by using leading-edge (forward phase) dimming or with trailing-edge (reverse phase) dimming. The power and energy consumption of the connected device is measured. Three additional digital inputs and the programmable behavior to the wireless commands allow flexible use in the house. The device is intended for installation in a flush-mounted box, e.g. behind light switches or sockets.
- Hardware platform
- ZM5101
- Short description
- The myTEM Radio Switch Dimmer is a universal, wall or ceiling dimming switch and is used to control an electrical device. The power and energy consumption of the connected device is measured. Three additional digital inputs and the programmable behavior to the wireless commands allow flexible use in the house.
- Product identifier
- MTSWD-100-WL
- Countries / regions
- European Union
- Supports smart start
- Yes
- Certification number
- ZC10-20066920
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_CONFIGURATION_V4
- Supported notification types
- Notification Type Event / State Power Management
- Supported / controlled meter types
- Meter Type Rate Type Description Electric meter
- Value updatable by consumer by rf switch load capacity watts value 250 electric load type value dimmable led switch load capacity current value 1 switch load capacity volt ampere value 250 association groups
- Group Number Maximum Nodes Supported End Point ID Group Name Profile Description 1
- From to description 1 1440 heartbeat rate [min] 5 send interval energy, output 1 period with which the energy of output 1 is sent by a meter report. 2 2 1 120 5 from to description 1 120 send interval energy [min] 6 minimum delta energy send, output 1 when the energy of output 1 changes by this anount the energy value is sent by a meter report. 2 2 1 50000 2000 from to description 1 50000 minimum delta energy send [0.001 k wh] 8 minimum delta power, output 1 when the power of output 1 changes by this anount the energy value is sent by a meter report. 2 2 1 100 5 from to description 1 100 minimum delta power [%] 4 leading/trailing edge output 1 is dimmable and the parameter is used for deciding on how to dimm the lighting device. the dimming can be achieved by using leading edge (forward phase) dimming (parameter set to 0) or with trailing edge (reverse phase) dimming (parameter set to 1). 2 2 0 1 0 from to description 1 1 trailing edge 0 0 leading edge 2 main voltage together with the mesured current and the phase shift configuration parameter the main voltage confirguation parameter is used to calculate the power of the outut. 2 2 80 280 230 from to description 80 280 main voltage [v] 3 phase shift cosines phi together with the mesured current and the main voltage configuration parameter the phase shift configruation parameter is used to calculate the power of the outut. 2 2 0 100 100 from to description 0 100 phase shift [0.01] 7 send interval power, output 1 period with which the power of output 1 is sent by a meter report. 2 2 1 120 5 from to description 1 120 send interval power [min] texts