- Name
- Radio Switch Dual Plus
- Brand
- myTEM SmartHome
- Features
- Feature Values Switch Load Capacity Watts
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0704
- Categories
- Sensors, All Lighting Devices, On/Off Switches/Devices
- Product id
- 0x0008
- S2 classes
- S2_UNAUTHENTICATED, S2_AUTHENTICATED
- Device type
- On/Off Power Switch
- Oem version
- HW: 1 FW: 1.00
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0704
- Z wave version
- 6.71.03
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x034E
- Product type id
- 0x0001
- Long description
- The myTEM Radio Switch Dual Plus is a universal, Z-Wave compatible wall or ceiling switch (ON/OFF) and is used to control two electrical devices. Two additional digital inputs and the programmable behav-ior to the wireless commands allow flexible use in the house. Optionally, a myTEM Touch Add-on control panel can be attached to the connector. The device is intended for installation in a flush-mounted box.
- Hardware platform
- ZM5101
- Short description
- The myTEM Radio Switch Dual Plus is a universal, Z-Wave compatible wall or ceiling switch.
- Product identifier
- MTSWI-101-WL
- Countries / regions
- European Union
- Certification number
- ZC10-19076686
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_SENSOR_BINARY
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Supported multilevel sensors
- Multilevel Sensor Type Air temperature
- Supported notification types
- Notification Type Event / State Power Management
- Value 1380 switch type value push button electric load type value incandescent elv (electronic) inductive (e.g. motor) firmware updatable value updatable by consumer by rf loads controlled value 2 sensors value air temperature humidity supported notification types value power management system switch load capacity current value 6 color value white switch load capacity volt ampere value 1380 association groups
- Group Number Maximum Nodes Supported End Point ID Description 3
- From to description 1 1440 heartbeat rate [min] 5 minimum delta humidity send when the humidity changes this anount the temperature value is sent by a multilevel sensor report. 0 2 10 1000 10 from to description 10 1000 minimum delta humidity [0.1 %] 3 minum delta temperature send when the temperature changes this anount the temperature value is sent by a multilevel sensor report. 0 2 1 100 5 from to description 1 100 minimum delta temperature [0.1 k] texts
- ID Description Value 2