Skip to main content

Loading…

Flush Shutter — QUBINO — Off Screen Space

Off Screen Space

Flush Shutter

QUBINO · Shade

Flush Shutter

View all QUBINO products

Connectivity: Z-WaveCategory: Shade

Z-WaveCertified

This Z-Wave module is used to control the motor of blinds, rollers, shades, venetian blinds, etc … The module can be controlled either through a Z-Wave network or through the wall switch. Precise positioning is supported for motors equipped with mechanical or electronic end switches. The module is designed to be mounted inside a “flush mounting box”, hidden behind a traditional wall switch. Module measures power consumption of motor and support connection of digital temperature sensor. It is designed to act as repeater in order to improve range and stability of Z-wave network.

Want to buy adds it to your wish list and follows QUBINO for updates. I own it adds it to your collection.

Compare

vs Competitor ▾

Connectivity

Z-Wave

Firmware

Current version HW: 1 FW: 6.04:06.05

Specifications

Overview

Company: QUBINO
Category: Shade
Device type: Window Covering - Pos/End Aware

Connectivity

Standard / protocol: Z-Wave
Connectivity: Z-Wave
Transport: Z-Wave
Spec version: 6.51.09
Z-Wave frequency: EU: 869.85MHz, 868.40MHz

Certification & compliance

Certificate ID

Community tags

Be the first to tag this page — tags appear right away. Try a theme, capability, or subject (e.g. WWII, heist, slow burn, time travel, A24).

More specs

Name: Flush Shutter
Brand: QUBINO
Features: Feature Values Supported Notification Types
Documents: Category Description File Manual_Primary_Lang
Role type: ROLE_TYPE_SLAVE_ALWAYS_ON
User icon: 0x1A00
Categories: Window Covering
Product id: 0x0052
Device type: Window Covering - Pos/End Aware
Oem version: HW: 1 FW: 6.04:06.05
Library type: SLAVE_ENHANCED_232
Supports nwi: Yes
Installer icon: 0x1A00
Z wave version: 6.51.09
Frequency plans: EU: 869.85MHz, 868.40MHz
Manufacturer id: 0x0159
Product type id: 0x0003
Long description: This Z-Wave module is used to control the motor of blinds, rollers, shades, venetian blinds, etc … The module can be controlled either through a Z-Wave network or through the wall switch. Precise positioning is supported for motors equipped with mechanical or electronic end switches. The module is designed to be mounted inside a “flush mounting box”, hidden behind a traditional wall switch. Module measures power consumption of motor and support connection of digital temperature sensor. It is designed to act as repeater in order to improve range and stability of Z-wave network.
Hardware platform: ZM5202
Short description: The Qubino Flush Shutter is the world's smallest Z-Wave module able to control the motors of blinds, rollers, shades, venetian blinds, etc.
Product identifier: ZMNHCD1
Countries / regions: European Union
Certification number: ZC10-17045565
Configuration parameters: Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 42
Supports explorer frames: Yes
Supported command classes: Identifier Name Key Version COMMAND_CLASS_POWERLEVEL
Controlled command classes: Identifier Name Key Version COMMAND_CLASS_BASIC
Supported multilevel sensors: Multilevel Sensor Type Air temperature
Supported notification types: Notification Type Event / State Power Management
Supported / controlled meter types: Meter Type Rate Type Description Electric meter
Value power management switch type value push button sensors value air temperature water temperature supported meter type value electric energy color value light blue association groups: Group Number Maximum Nodes Supported End Point ID Description 1

From to description 1 32767 = 1 second 32767 seconds. reporting enabled, power report is send with time interval set by entered value 0 0 reporting disabled 78 forced shutter calibration by modifying the parameters setting from 0 to 1 a shutter enters the calibration mode. 0 1 0 0 0 from to description 0 0 1 1 start calibration process (when calibration process is finished, completing full cycle up, down and up, set the parameter 78 (forced shutter calibration) value back to 0 71 operating modes this parameter defines selection between two available operating modes. note1: after parameter change, first exclude module (without setting parameters to default value) then wait at least 30s and then re include the module! 0 1 0 0 0 from to description 1 1 venetian mode (up/down and slate rotation) 0 0 shutter mode 72 slats tilting full turn time this parameter defines the time necessary for slats to make full turn (180 degrees). 0 2 0 0 150 from to description 0 0 tilting time disabled 2 32767 = 0,01seconds 327,67 seconds 150 150 = 1,5 seconds 73 slats position this parameter defines slats position after up/down movement through z wave or push buttons. • default value 1 • 0 slats return to previously set position only in case of z wave control (not valid for limit switch positions). • 1 slats return to previously set position in case of z wave control, push button operation or when the lower limit switch is reached. 0 1 0 0 1 from to description 1 1 slats return to previously set position in case of z wave control, push button operation or when the lower limit switch is reached 0 0 slats return to previously set position only in case of z wave control (not valid for limit switch positions) 250 unsecure / secure inclusion flush shutter supports secure and unsecure inclusion. even if the controller does not support security command classes, a dimmer could be included as unsecure and keep all the functionality. 0 1 0 0 0 from to description 0 0 unsecure inclusion 1 1 secure inclusion 10 activate/deactivate functions all on / all off flush shutter responds to commands all on / all off that may be sent by the main controller or by other controllers belonging to the system. 0 2 0 0 255 from to description 255 255 all on active, all off active 0 0 all on is not active all off is not activ 1 1 all on is not active all off active 2 2 all on active all off is not active 74 motor moving up/down time this parameter defines shutter motor moving time of complete opening or complete closing. note: important is that the reference position to manually set moving time is always shutter lower position! set parameter 74 to 0 and move the shutter (using up/down push buttons or main controller ui) to the lowest desired position. on this shutter position, set parameter 74 to time for complete opening or complete closing. at this point shutter can be moved up (open) for set time, but can't be moved down because this position is already set as lower shutter position. to change shutter lower position below already set (manual recalibration), parameter 74 must be set to 0 and repeat the procedure described above. in case shutter has limit switches, but anyhow you would like to limit opening/closing position by time, you can still do it. in case you put time that is longer that opening/closing real time limited by limit switches, shutter will stop at limit switch, but the module relay will switch off after define time, not by shutter limit switch. take in consideration that in this condition, the positioning with slider through ui will not show correct shutter position. 0 2 0 0 0 from to description 0 0 moving time disabled (working with limit switches) 1 32767 = 0,1 seconds 3276,7 seconds. after that time motor is stopped (relay goes to off state) 110 temperature sensor offset settings set value is added or subtracted to actual measured value by sensor. 0 2 0 0 32536 from to description 32536 32536 offset is 0.0 degrees celsius 1 100 value from 0.1 degrees celsius to 10.0 degrees celsius is added to actual measured temperature 1001 1100 value from 0.1 degrees celsius to 10.0 degrees celsius is subtracted to actual measured temperature 120 temperature sensor reporting if digital temperature sensor is connected, module reports measured temperature on temperature change defined by this parameter. available configuration parameters (data type is 1 byte dec): • default value 5 = 0,5°c • 0 reporting disabled • 1 127 = 0,1°c 12,7°c, step is 0,1°c 0 1 0 0 5 from to description 0 0 reporting disabled 1 127 = 0,1 degrees celsius 12,7 degees celsius; step is 0,1 degrees celsius 5 5 = 0,5 degrees celsius texts